66FW-54H (serv.man12) - Sharp TV User Guide / Operation Manual. Page 42

41

The signal source can be selected from each of the input terminals in
this mode.

Press the TV/VIDEO button  ● to see the TV/VIDEO Menu.

Press the GREEN, YELLOW or BLUE button 

to see the

REAR Menu, FRONT Menu or AV LINK Menu [ 

 ].

3.1. Press the Cursor UP/DOWN buttons  

E

/ 

F

to select

another signal source. The red point mark indicates the selected
source.
3.2. Press the TV/VIDEO button 

●

to clear the on-screen display 

or press:  RED button 

to restore the ANTENNA signal.

YELLOW button 

to see the FRONT Menu.

BLUE button 

to see the AV LINK Menu [

]

4.1. Press the Cursor UP/DOWN buttons  

E

/ 

F

to select

another signal source. The red point mark indicates the selected
source.
4.2. Press the TV/VIDEO button 

●

to clear the on-screen display

or press: RED button 

to restore the ANTENNA signal.

GREEN button 

to see the REAR Menu.

BLUE button 

to see the AV LINK Menu [

]

[

]

5.1. Press the Cursor UP/DOWN buttons  

E

/ 

F

to select

Record what you see. The red point mark indicates the selected
item.

5.2. Press the RED button 

to start recording.

5.3. Press the GREEN button 

to stop recording.

Device scan check if a VCR with AV LINK system
is connected to the TV, through the AV-1 terminal.

  About AV LINK: THIS FEATURE CAN ONLY BE USED WITH NexTView, Smart Link, Easy Link
and Megalogic COMPATIBLE VCR.

This “Intelligent” communication system allows to control some VCR functions from the TV and vice versa.
For example it is possible to program the VCR timer recording from the TV or record the signal currently being
displayed on the TV regardless of the signal source.
In this case, the VCR and the TV must be connected through the euroconnector specially available for this function
(AV-1 terminal in this TV set). Refer to your VCR operation manual for further information.