66FW-54H (serv.man12) - Sharp TV User Guide / Operation Manual. Page 3

“SHARP” consumer electronic products have established a world-wide reputation for unsurpassed quality and precision
manufacturing techniques since 1924, when the famous SHARP trademark first appeared on a radio receiver.
Your new SHARP Colour TV uses the very latest electronic circuitry and engineering advances for the best possible
performance.
Given proper care, your new TV will provide many years of entertainment for the entire family. Please read the following
instructions before operating this set.

The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse.

Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked  

7

7

or  

8

8

and of the same rating as above, which is also indicated on the pin face of the plug must be used.

Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.

In the unlikely event of the socket outlets in your home not being compatible with the plug supplied,
cut-off the mains plug and fit an appropriated type.

The fuse from the cut-off plug should be removed and the cut-off plug destroyed
immediately and disposed of in a safe manner.

Under no circumstances should the cut-off plug be inserted elsewhere into a 13A 
socket outlet as a serious electric shock may occur.

To fit an appropriate plug to the mains lead follow the instructions below:

The wires in the mains lead are coloured in accordance with the following code:
Blue:

As the colours of the wires in the mains lead of this product may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:

- The wire which is coloured blue must be connected to the plug terminal which is marked N 
or coloured black.

- The wire which is coloured brown must be connected to the plug terminal which is marked 
L or coloured red.

Ensure that neither the brown nor the blue wire is connected to the earth terminal in your 
three pin plug.

Before replacing the plug cover make sure that:

- If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off 
plug.

- The cord grip is clamped over the sheath of the mains lead and not simply over the lead 
wires.

IF YOU HAVE ANY DOUBT CONSULT A QUALIFIED ELECTRICIAN.

In the unlikely event of this equipment requiring repair during the guarantee period, you will need to
provide proof of date of purchase to the repairing company.
Please keep your invoice or receipt, which is supplied at the time of purchase.

2