66ES-D7H (serv.man2). DA100 Repair Notes - Sharp TV Service Manual (repair manual). Page 63

Read Sharp 66ES-D7H (serv.man2) Service Manual online

DA100 (50Hz) Chassis – Article for Television Magazine 
Preventative Maintenance 
Ensure that: 
 
1.  The 170V avalanche diode is fitted across C720. 
2.  C604 is rated at 105C. 
3.  R713 and R714 are metal film types. 
4.  R1721 and R1722 (Pro-Logic power supply) are metal film types. 
5.  On the 66FW53/4H and 76FW53/4H that the two extra capacitors are fitted to the CRT base, 
as shown in the diagram below. 
6.  There are no dry joints in the horizontal output circuitry, especially on C613 and R613. 
7.  The EPROM fitted is correct for the CRT and circuit combination (see IC information at the start 
of this article for more information on this). 
 
 
 
Figure 61: CRT Base PWB Modification (66cm and 76cm sets only) 
 
Reference Description 
Part 
Number 
C1826 Capacitor, 
4.7nF 
500V 
VCKYPA2HB472K 
C1827 
Capacitor, 10nF 250V 
RC-KZ0029CEZZ 
C604 Capacitor, 
330µF 10V 105C 
VCEAGA1AW337M 
C720 Capacitor, 
100µF 200V 
RC-EZ0258CEZZ 
D735 
Avalanche Diode, 170V 
RH-EX0875BMZZ 
R1721 Resistor, 
560kΩ 0.5W Metal Film 
VRC-MA2HG564J 
R1722 Resistor, 
560kΩ 0.5W Metal Film 
VRC-MA2HG564J 
R713 Resistor, 
560kΩ 0.5W Metal Film 
VRC-MA2HG564J 
R714 Resistor, 
560kΩ 0.5W Metal Film 
VRC-MA2HG564J 
 
Page 63 of 80 
Sharp Electronics (UK) Limited - March 2003 
Revision 2
 
Page of 80
Display

Click on the first or last page to see other 66ES-D7H (serv.man2) service manuals if exist.