66ES-03H (serv.man29). Change to IC201, circuit changes may be necessary. - Sharp TV Technical Bulletin (repair manual)

66es-03h (serv.man29) technical bulletin
Model
66ES-03H (serv.man29)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
123.19 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
TV / CTR / Change to IC201, circuit changes may be necessary.
File
66es-03h-sm29.pdf
Date

Read Sharp 66ES-03H (serv.man29) Technical Bulletin online

CTV2000 03 06
Month of Issue: 
March 2000
Classification:
White
TELEVISION TECHNICAL BULLETIN
Page 1 of 2
Sharp Electronics (UK) Limited
Reference AVW03032000-2
Revision 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
MODELS
51DS02H
51DS03H
51DS05H
59DS03H
59DS05H
66DS03H
66DS05H
66ES03H
66ES05H
51FS51H
REASON
During production of the above models, IC201 has been changed for TDA8840,
TDA8843 or TDA8844.  Although these IC’s are similar, it may be necessary to carry
out circuit changes depending upon which type is supplied.  Refer to the ACTION
section below for details on changes.
Note that wherever possible, fit the same IC that was in the receiver originally.
ACTION
51DS02H, 51DS03H, 51DS05H and 51FS51H only:
 
TDA8843 and TDA8844 are completely interchangeable without any circuit
changes.
 
If fitting a TDA8843 with a TDA 8844 remove C402.
 
If fitting a TDA8840 with a TDA8843 add C303, C402, C808 and C809.  Note that
C402, C808 and C809 are zero Ohm resistors.
CTV2000 03 06
Month of Issue: 
March 2000
Classification:
White
TELEVISION TECHNICAL BULLETIN
Page 2 of 2
Sharp Electronics (UK) Limited
Reference AVW03032000-2
Revision 1
White – Carry out as required
Yellow – Carry out as required and whenever the unit comes in for service
Red – Carry out on all units
51DS02H, 51DS03H, 51DS05H, 59DS03H, 59DS05H, 66DS03H, 66DS05H,
66ES03H, and 66ES05H:
 
If the TDA8843 is fitted to any of the above receivers, it may be a mask Y or 2Y
(identifiable by 1Y or 2Y being stamped on the top of the IC).  These two mask
versions are not interchangeable unless the circuit is changed.
 
If the 1Y version is fitted, the circuit and parts are as per the service manual.
 
If the 2Y version is fitted, the following circuit and NVM changes have to be made:
1.  Replace R224 with a 270R, 0.12W resistor.
2.  Replace R402 with a 56R, 0.5W resistor.
3.  Replace IC105 with the correct type for the model (see parts list below).
4. Remove T201.
5.  Change the data contained in the NVM as below.
NVM data for 51DS02H, 51DS03H and 51DS05H:
Position
2C
2D
72
73
84
85
Data
40
00
1C
4C
01
00
NVM data for 59DS03H, 59DS05H, 66DS03H, 66DS05H,66ES03H, and 66ES05H:
Position
2C
2D
72
73
84
85
Data
40
00
1E
4E
01
00
REF NO
DESCRIPTION
PART NUMBER
PRICE CODE
IC201
TDA8840
VHITDA8840/-2
AZ
IC201
TDA8843 Y1
VHITDA8843/-1
BD
IC201
TDA8843 Y2
VHITDA8843/-2
BC
IC201
TDA8844
VHITDA8844/-2
BD
C303
SMD Capacitor, 220nf 25V
VCKYTV1EF224Z
AA
C402
SMD Resistor, 0R
VRS-TV1JD000J
AA
C808
SMD Resistor, 0R
VRS-TV1JD000J
AA
C809
SMD Resistor, 0R
VRS-TV1JD000J
AA
R224
SMD Resistor, 270R
VRS-TV1JD271J
AA
R402
Resistor, 56R
VRD-RA2HD560J
AA
IC105
EPROM for 02/03
CH-IX1507CJHJ
AV
IC105
EPROM for 51DS05H
CH-IX1600CJHB
AX
IC105
EPROM for 05
CH-IX1600CJHA
AX
Page of 2
Display

Download Sharp 66ES-03H (serv.man29) Technical Bulletin

Here you can read online and download Sharp 66ES-03H (serv.man29) Technical Bulletin in PDF. 66ES-03H (serv.man29) technical bulletin will guide through the process and help you recover, restore, fix, disassemble and repair Sharp 66ES-03H (serv.man29) CTR. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.