Read Sharp 56FW-53H Service Manual online
DA100 (50Hz) and DA50W Chassis – Repair Notes
Page 11 of 80
Sharp Electronics (UK) Limited - May 2003
Revision 3
GF Models
The table below details the different part numbers for IC1002. Note that this IC can either be an EPROM or a
MTP. An EPROM has a small window in its top to enable the IC to be erased by ultra-violet light. A MTP does
not have this window and normally works at 3.3V.
MTP. An EPROM has a small window in its top to enable the IC to be erased by ultra-violet light. A MTP does
not have this window and normally works at 3.3V.
Model
CRT
EPROM Type
EPROM Part Number
66GF63H Philips
EPROM CH-IX1711CJH1E
66GF63H Thomson MTP
CH-IX1711CJH1M
66GF64H Philips
EPROM CH-IX1711CJH0
76GF63H Philips
MTP
CH-IX1841CJH7
76GF64H Philips
EPROM CH-IX1664CJHAE
76GF64H Philips
MTP
CH-IX1664CJHAM
Note 2 - Second NVM Fitting
Some sets use a second NVM, designated IC1004 to store teletext page information and some audio data in the
case of Dolby Pro-logic models. Sets that have the second NVM fitted are:
66FW54H 76FW54H 66GF64H 76GF63H 76GF64H
The part number for this device is the same as IC1003.
case of Dolby Pro-logic models. Sets that have the second NVM fitted are:
66FW54H 76FW54H 66GF64H 76GF63H 76GF64H
The part number for this device is the same as IC1003.
Note 3 IC1801 Types
IC1801 is the cathode drive amplifier mounted on the CRT base PWB.
Depending upon the chassis type, the CDA IC can be one of three types as listed below:
Depending upon the chassis type, the CDA IC can be one of three types as listed below:
IC Type
Sharp Part Number
Comment
TEA5101A
RH-IX1416BMZZ
All FW and some GF
STV5109 RH-IX1803BMZZ
Some GF and all HW models
TDA6019JF
RH-IX1833BMZZ
Late 56FW53H models
These IC are not interchangeable.
Note 4 – IC801 Types
IC801 can be one of two types. It is either a 3120 or 3130, and they are not interchangeable. The part number
for the VDP3120C2 is RH-IX1688BMN2, the part number for the VDP3130Y is RH-IX1858BMZZ. The 3130 are
fitted in all HW models and some later FW and GF models.
Some patterning can occur when fitting later revisions of the VDP3120C2 to earlier chassis versions. In this
situation remove C824, which is connected from pin 33 of IC801 to ground.
for the VDP3120C2 is RH-IX1688BMN2, the part number for the VDP3130Y is RH-IX1858BMZZ. The 3130 are
fitted in all HW models and some later FW and GF models.
Some patterning can occur when fitting later revisions of the VDP3120C2 to earlier chassis versions. In this
situation remove C824, which is connected from pin 33 of IC801 to ground.
Click on the first or last page to see other 56FW-53H service manuals if exist.