56FW-53H (serv.man26). Quick Start Guide - Sharp TV User Guide / Operation Manual. Page 2

Read Sharp 56FW-53H (serv.man26) User Guide / Operation Manual online

Power indicator
Main power button
Press the main power button (
®)
to start the AUTO INSTALLATION.
The red power indicator will light.
The AUTO INSTALLATION            
message will appear on your TV        
screen.
The AUTO INSTALLATION function will tune all available
TV stations into your TV.
The TV is ready to preset automatically all local channels
for you.
SUPPLIED ACCESSORIES
Fitting the batteries
1. With your thumb nail, pull
up the slit as shown.
2. Insert the two batteries as
shown.
3. Replace the cover.
1
TYPICAL CONNECTIONS
2
TURN TV ON FOR THE FIRST TIME
Check List:
 Is the TV connected to the mains?
● 
Is the aerial connected to the TV?
3
AUTO INSTALLATION
4
If you do not intend to use your TV with
a VCR then please proceed to stage 4.2
If the TV is being used
  with a VCR, turn on the
VCR and play back a
  p re - re c o rd e d  t a p e .
Now, press any button
   on the TV remote
control and follow the
  instructions on the
screen, to start Auto
Channel Preset.
This tuning process may
take several minutes to
perform.
After searching has
  finished the channels will
The "Stored programmes" menu will appear on screen
and you can change the order of the channels and change
or give the channels a four letter name.
If you wish to rename the channels, or change the order,
refer to the pages 9 and 10, chapter Stored programmes
in the Operation Manual
If you wish exit from the menu, press the BLUE button.
Note:
If you need to repeat the “AUTO INSTALLATION”, please
refer to the relevant section on page 29 of the operation
manual.
VCR
Remote control
Type-AA Dry Batteries
Operation Manual
Back of TV
Automatic searching and sorting
Press the menu button to cancel
56FW-53H
COLOUR TELEVISION
OPERATION MANUAL
Printed on recycled paper
TV set
Pr 01
Page of 2
Display

Download Sharp 56FW-53H (serv.man26) User Guide / Operation Manual