Read Sharp 56FW-53H (serv.man24) User Guide / Operation Manual online
30
After preset has been performed
The following features are available for preset channels:
Fine tuning
When a preset programme channel is not exactly tuned, you can fine tune the channel in this mode.
1.
Press the MENU button
● to see the MAIN Menu.
2.
Press the BLUE button
to see the TUNE Menu.
3.
Press the Cursor UP/DOWN buttons
E
/
F
to select
«Programme» (red marked).
4.
Press the Cursor LEFT/RIGHT buttons
C
/
I
(or 0 ~ 9 digit buttons)
to select the programme channel number you want to tune.
5.
Press the Cursor UP/DOWN buttons
E
/
F
to select «fine
tune» (red marked).
6.
Press the Cursor LEFT/RIGHT buttons
C
/
I
to adjust the picture
for the best quality.
7.
Repeat the above procedure (3. ~ 6. steps) for other programme
channels as required.
channels as required.
8.
Press the MENU button
● to clear the on-screen display.
Mode
This feature allows you to select TV, FILTER, VCR or SKIP.
1.
Press the MENU button
● to see the MAIN Menu.
2.
Press the blue button
to see the TUNE Menu.
3.
Press the Cursor UP/DOWN buttons
E
/
F
to select
«Programme» (red marked).
4.
Press the Cursor LEFT/RIGHT buttons
C
/
I
(or 0 ~ 9 digit buttons)
to select the programme channel number you want to set.
5.
Press the Cursor UP/DOWN buttons
E
/
F
to select
«Mode» (red marked).
6.
Press the Cursor LEFT/RIGHT buttons
C
/
I
to select “TV”,
“FILTER”, “VCR” or “SKIP”.
TV:
TV:
If the TV signal is weak the image can shake.
In this case put it in TV mode.
In this case put it in TV mode.
FILTER: This mode can be convenient when the level of the signal
received is weak.
VCR:
In some cases the upper part of the picture may be
distorted when receiving signal from a VCR via RF
terminal on the TV set.
Selecting this option will help to reduce this effect.
distorted when receiving signal from a VCR via RF
terminal on the TV set.
Selecting this option will help to reduce this effect.
SKIP:
Allows you to SKIP channels you do not want to view
when using channels selector buttons
when using channels selector buttons
E
/
F
.
7.
Repeat the above procedure (3. ~ 6. steps) for other programme
channels as required.
channels as required.
8.
Press the MENU button
● to clear the on-screen display.
MAIN Menu
TUNE Menu
MAIN Menu
TUNE Menu
Click on the first or last page to see other 56FW-53H (serv.man24) service manuals if exist.