56FW-53H (serv.man22). Split - Part 2 - Pages 2-13 - Sharp TV User Guide / Operation Manual. Page 6

7

STATION

REAL CHANNEL

FREQUENCY

SIGNALS

NUMBERS

MHZ

VHF

I-1 (A) ÷ I-9 (J)

CH-01 ÷ CH-09

45.75 ÷ 215.25

UHF

I-21 ÷ I-69

CH-21 ÷ CH-69

471.25 ÷ 855.25

C

M1/S1 ÷ M10/S10

CC-01 ÷ CC-10

105.25 ÷ 168.25

A

U-1/S-11 ÷ U-10/S-20

CC-11 ÷ CC-20

231.25 ÷ 294.25

T

S-21 ÷ S-41

CC-21 ÷ CC-41

303.25 ÷ 463.25

V

CC-42 ÷ CC-63

48 ÷ 304

CC-64 ÷ CC-68

69.25 ÷ 98.25

This TV memorizes the Mode last used when it was switched off. When the
main power button (

I

) is pressed to turn on the set, the power indicator will

light and the set will resume in either the Stand-by mode or Programme
mode, depending upon its condition when it was switched off.

When the TV is in Stand-by mode, to turn ON the TV press the Stand-by but-
ton (

B

l

TV) on the remote control, or one of the four buttons on the TV

( Va/\, VCH/\ ). The TV will change from Stand-by mode to Programme
mode, the sound indicator will light a few moments and an image will appear
on the screen. Press the Stand-by button (

B

l

TV) again and the TV will return

to Stand-by mode.

If noise appears in TV or VCR mode, the screen turns blue. The blue back off-timer is then engaged and will automati-
cally switch to Stand-by mode after 15 minutes.

Channel setting is mainly performed using the remote control. Please follow the instructions with the remote control in
hand.
Television broadcasting stations have channel numbers assigned to them (real channel numbers). You can assign your
own channel number to a real channel and store it in the programme preset memory.

Power indicator

Main power button