32LW-92H (serv.man3) - Sharp TV User Guide / Operation Manual. Page 17

Read Sharp 32LW-92H (serv.man3) User Guide / Operation Manual online

- 17 -
To Select a Subcode Page
Subcode pages are subsections of long Teletext pages that
can only be displayed on the screen one section at a time.
• Select the required Teletext page.
• Press “
“ button.
• Select the required subcode page number by pressing four
digit buttons (e.g. 0001).
•  If  the  selected  subcode  page  is  not  displayed  in  a  short
time, press “ “ button. TV programme will be displayed on
the screen.
• Teletext page number will be displayed on the upper left
corner of the screen when the selected page is found.
• Press “
“button to display the selected Teletext page.
Fastext
Teletext mode will be selected according to transmission au-
tomatically.
Your TV  supports  the  7  page Teletext  system.  When  the
page number of any of the 7 pages in memory is entered, the
system will not search for the requested page; instead it will
display the page automatically.
• Press “ ” button  to move the Teletext screen forward one
page at a time.
• Press “ ” button  to move the Teletext screen backward
one page at a time.
For Fastext
The subject-heading for the information may have a particular
colour or can be in a form located in a coloured box.
• Press an appropriate RED, GREEN, YELLOW or BLUE but-
ton in order to reach the relevant page quickly.
To exit Teletext
• Press “
79
” button. The screen will switch to TV mode.
Connecting  external  equipment
Via the Euro connector
Your TV set has two euro connector sockets. If you wish to
connect  external  equipment
  (e.g.  video  recorder,  decoder,
etc.) which have Euro connectors, to your TV, use the EXT.1
(EXT-1) or EXT.2 (EXT-2) terminals.
If an external device is connected via Euro connector sockets
the TV will be switched to AV mode automatically.
RGB mode
If a piece of equipment outputs RGB signals use the EXT-1
Euro connector as this is RGB ready.
EXT-2S Mode
If the equipment connected to your TV set supports S-Video
(Y/C) output from Euroconnector, you can have a better pic-
ture quality by selecting EXT-2S mode and connecting your
equipment to the EXT.2 (EXT-2S) terminal of TV. See your
equipment's  booklet  to  check  if  your  equipment  has  such
feature.
Via the RCA jacks
If you have an equipment (such as a Camcorder) which has
the RCA jacks, connect it to the Front AV (F-AV) terminal
with the video and audio cables.
• If the equipment has the mono audio jack, connect it to the
AUDIO-L jack.
Via the ANT (aerial) socket
If your equipment does not have an Euroconnector or RCA
jacks, connect it to the TV with an aerial cable. For details,
see the manual provided with the equipment.
• To  store  the  test  signal  that  comes  from  the  equipment,
see “INSTALL. Menu” on page 13 and store it to the pro-
gramme number 0. You can watch images from that equip-
ment to select the programme number which you stored the
test signal.
TV and Video Recoder (VCR)
•  Connect  the  Video  Recorder  to  the ANT  (antenna  input)
socket of the TV with the aerial cable.
• Connect the Video Recorder to the EXT.1 or EXT.2 terminal
with the SCART cable, or connect it to the Front AV (F-AV)
terminal with the audio and video cables.
NTSC Playback
Connect a NTSC video recorder to a terminal. Then press
“
(;7
” button to select the corresponding AV mode.
NTSC  3.58/4.43  system  is  detected  automatically  in AV
mode.
Copy Facility
You can output the video and audio signals which inputs from
TV or EXT.1 (EXT-1) terminal to the video recorder connected
to the EXT.2 (EXT-2) terminal.
• To select the output source, see “Setting External Source
Output” on page 13.
Connecting Headphones
Use  the  stereo  headphone  socket  of  your  TV,  to  connect
headphones.
ENG-2842W-3242W-AK45-SHARP -1548 UK-TV-2.p65
30.10.2003, 13:46
17
Page of 27
Display

Click on the first or last page to see other 32LW-92H (serv.man3) service manuals if exist.