32LF-92H (serv.man3) - Sharp TV User Guide / Operation Manual. Page 15

- 14 -

INSTALL. (Installation) Menu

You can store a channel manually, or modify the current set-

tings of a channel (for example, fine-tuning a channel).

You can also change the colour system.

• Press “M” button to display the main menu.
• Press “ ” or “ ” button to select “INSTALL.” item. Then

“ ” or “ ” button to display the “INSTALL.” menu.

6281'
3,&785(
)($785(
,167$//
352*5$0

Note:
• If you want to modify the current settings of a channel, se-

lect the channel of which you want to modify the setting.

Then display the main menu on screen.

• In AV mode, you can change only the “COLOUR SYSTEM”

item.

1. PROGRAMME is the first selected item as you enter the

INSTALL. menu. Press the “ ” or “ ” button to select the

programme number where you want the tuned channel to

be stored. (You may also type the programme number us-

ing the digit buttons)

Note:
•  Do  not  use  the  PROGRAMME  item  when  you  want  to

modify the current programme number setting as this may

cause other programmes to be changed that are in the ex-

isting programme number.

2. Press “ ” or “ ” button to select Tuning Mode. By press-

ing “ ” or “ ” button , you can select the mode in which

you  want  the  search  to  be  made,  "Channel  Search"

mode or "Frequency Search" mode.

• When you select "Channel Search" ("Channel" will be

displayed  in  the  menu.),  the  display  of  the

INSTALL.(Installation) Menu will be as below :

352*5$00(

781,1*02'(

%$1'

&+$11(/

&2/2856<67(0

),1(781,1*

6($5&+

3

&+$11(/

6

3$/

3. Press “ ” or “ ” button to select BAND. Using “ ” or “ ”

button to select the band in which you want to search a

channel.

4. Press “ ” or “ ” button to select SEARCH. Press “ ” or

“ ” button to start searching. (Press “ ” button to search
forward. Press “ ”  to search backwards.)

• If the found channel is not the desired one, press “ ” or

“ ” button to start searching again.

• To stop searching before a channel is found, press the

reverse direction button. For example, when the TV is
searching forward with “ ” button, press “ ” button to

stop searching.

• If you know the channel number which you want to find,

you can find the channel directly. Follow the step 5 to

select the correct standard, then press “ ” or “ ” to

select CHANNEL again, and press“ ” or “ ” button to

select the channel number, or enter the number with the

digit buttons.

5. If the picture is not clear or no colour appears, change the

colour system to display the picture normally. Press “ ”
or “ ” button to select COLOUR SYSTEM, then press “ ”
or “ ” button to choose the correct one.

• In TV mode: PAL / SECAM
•  In AV  mode:  AUTO  /  PAL  /  SECAM  /  NTSC  3.58  /

NTSC 4.43

6. If  the  channel  reception  is  poor,  fine-tune  the  channel.

Press “ ” or “ ” to select FINE TUNING, then press “ ”
or “ ” button to fine-tune the channel.

7. After  the  all  settings  are  completed,  store  the  new

channel’s setting to the programme number which you se-

lected.  Press  “ ”  or  “ ”  to  select  STORE,  then  press
“ ” or “ ” button to store it.

781,1*02'(

%$1'

&+$11(/

&2/2856<67(0

),1(781,1*

6($5&+

6725(

&+$11(/

6

3$/

8. When you select "Frequency Search" , the display of the

Tuning  menu will be as below :

352*5$00(

781,1*02'(

&2/2856<67(0

)5(48(1&<

6($5&+

6725(

3

)5(48(1&<

3$/

• As  "Frequency    Search"  is  selected, TV  will  search  ac-

cording to the channel frequencies.

• With the“ ” or “ ” button, select Search. Search can be

made  either  forward,  pressing  “ ”  button  or  backwards,
pressing “ ” button.

•  The  search  will  be  done  with  steps  of  0.25MHz.  in  each

step.

• If the tuned station is not the desired one, you can continue

searching pressing “ ” or “ ” button again.

•  When  the  desired  station  is  tuned,  select  STORE  using

“ ” or “ ” button and store it to the programme number
you selected pressing “ ” or “ ” button or press “OK” but-

ton.

• Now as you had selected the Frequency Search, the tuning

mode of the program is stored as Frequency Search Mode.

Direct Frequency Access

• If you know the  broadcast band and the channel frequency

of the station you want to tune, you do not need to make

search; select Frequency,  using “ ” or “ ” button in the

Frequency Mode Tuning Menu. You can type the first 3 dig-

its of the frequency using the digit buttons, and then you
can select the decimal part of the frequency by using “ ” or
“ ” buttons with 250kHz steps. For example if you want to

tune the station at frequency 224.25 MHz; first you can di-

rectly type 224. The bar at bottom of the menu will show

224.00 . Then by increasing or decreasing with 0.25 MHz
steps  using  “ ”  or  “ ”  buttons,  you  can  select  the

224.25MHz .When you type and select the frequency, the

corresponding station will be displayed.

ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-1.p65

21.01.2004, 08:28

14