Read Sharp 21LF-90H (serv.man4) User Guide / Operation Manual online
- 21 -
To Stop Automatic Page Change
The teletext page you have selected may
contain more information than can be dis-
played on one screen, in such cases the
page will update periodically.
Press
Press
button to stop the automatic
page change.
Press
button again to allow the next
page to be displayed.
To Select a Subcode Page
Subcode pages are subsections of long
Teletext pages that can only be displayed on
the screen one section at a time.
Select the required Teletext page.
Press
Select the required Teletext page.
Press
button.
Select the required subcode page number
by pressing four digit buttons (e.g. 0001).
If the selected subcode page is not displayed
in a short time, press
button. TV
programme will be displayed on the screen.
Teletext page number will be displayed on
the upper left corner of the screen when the
selected page is found.
Press
button to display the selected
Teletext page.
To exit Teletext
Press
79
button. The screen will switch
to TV mode.
To Display the Time
While watching a TV programme with Tele-
text transmission press
button. The
current time information, captured from Tele-
text will be displayed at the upper middle of
the screen.
If the programme being watched does not
have Teletext transmission, no iformation
will be displayed.
Connecting external
equipment
There is a wide range of audio and video
equipment that can be connected to your TV.
The following connection diagrams show
The following connection diagrams show
you where the different equipment should
be connected at the back or the front side of
the TV.
Via the Euro connector
Your TV set has one Euro connector
(SCART)
socket. If you want to connect exter-
nal equipment (e.g. video, decoder, etc.)
which have Euro connectors, to your TV, use
SCART
terminal.
If an external device is connected via Euro-
connector socket the TV will be switched to
AV mode automatically.
RGB mode
If a piece of equipment outputs RGB signals
use the
SCART socket
as this is RGB ready.
Via the ANT (aerial) socket
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have
Euroconnector, you should connect it to the
ANT input of your TV set.
If the VCR is connected via antenna input
If the VCR is connected via antenna input
it is suggested to use the Programme 0.
Decoder
Cable TV offers you a wide choice of pro-
grams. Most of them are free, others are to
be paid for by the viewer. This means that
you will need to subscribe to the broadcast-
ing organisation whose programmes you
wish to receive. This organisation will supply
you a corresponding decoder unit to allow
the programmes to be unscrambled.
For further information ask your dealer. See
For further information ask your dealer. See
also the booklet supplied with your decoder.
ENG-2163-1548 UK-PAL-TEK SCART-FAV-STEREO-SHARP-AK44-TV2.p65
06.01.2004, 15:37
21
Click on the first or last page to see other 21LF-90H (serv.man4) service manuals if exist.