21LF-90H (serv.man2) - Sharp TV Service Manual (repair manual). Page 3

Read Sharp 21LF-90H (serv.man2) Service Manual online

3
21LF-90H
ELECTRICAL SPECIFICATIONS
                                            WARNING
The chassis in this receiver is partially hot. Use an isolation transformer between the line cord plug
and power receptacle, when servicing this chassis.
To prevent electric shock, do not remove cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel.
Specifications are subject to change without prior notice.
•Picture Intermediate frequency ......... 38.9MHz
•Sound  Carrier Trap ........................... 32.9MHz
•Adjacent Sound Carrier Trap ............. 40.9MHz
•Adjacent  Picture  Carrier Trap .......... 30.9MHz
•Aerial Input Impedance
VHF/UHF ................. 75 ohm Unbalanced
•Tuning Ranges ..... 45.75 MHz thru 855.25 MHz
VHF: IR A - J / CC01-CC68 (Hiperband)
UHF: I21 - I69 CH
•White Level
Apply the rated voltage at the rated frequency to the TV set, while it is receiving full white pattern RF signal of 60
dB/µV from its RF input via the pattern generator.
Turn all picture controls to maximum value. Measure the colour temperatures at the center of the screen by
using the colour analyzer.
X=0.290 ± 0.015         Y=0.284 ± 0.015
AREA
21”
A
0.3
BC
1.0
DE
1.0
FGHJ
1.3
KLMN
1.2
F’G’H’J’
1.2
STUV
1.1
•Power Input .................... 220V-240 Volts AC 50 Hz
•Power Consumption
Normal Operation (Method IEC60107) .............. 62 W
Stand-by Operation .......................................... < 3 W
•Audio Power Output Rating (MPO) / Impedance
Internal Left Speaker ................................. 4 W, 16 
Internal Right Speaker ............................... 4 W, 16 
•Speakers
Speaker elliptic (2 pcs) .......................... 50 x  120 mm
•Convergence (Maximum Misconvergence)
MODEL  DESTINATION (Operation Manual Languages)
21LF-90H: English.
Page of 13
Display

Click on the first or last page to see other 21LF-90H (serv.man2) service manuals if exist.