Read Sharp XV-Z91E Handy Guide online
Lamp Replacement Procedure
Version 1.4
Issue 04/2006
Issue 04/2006
14
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
1.
Connect the power cord.
•
Plug the power cord into the AC socket of the projector.
2.
Reset the lamp timer.
•
In the following order, press “ON”, “INPUT”,
“UNDO”, ADJ LEFT”, “ENTER” and “ADJ RIGHT”.
Then press the “ON” key.
“UNDO”, ADJ LEFT”, “ENTER” and “ADJ RIGHT”.
Then press the “ON” key.
•
“LAMP 0000H” is displayed, indicating that the
lamp timer is reset.
lamp timer is reset.
Note
•
Make sure to reset the lamp timer only when
replacing the lamp. If you reset the lamp timer and
continue to use the same lamp, this may cause
the lamp to become damaged or explode.
replacing the lamp. If you reset the lamp timer and
continue to use the same lamp, this may cause
the lamp to become damaged or explode.
•
You need to reset the lamp timer every time you
replace the lamp and confirm it is reset on the
“Lamp Timer” menu.
replace the lamp and confirm it is reset on the
“Lamp Timer” menu.
Click on the first or last page to see other XV-Z91E service manuals if exist.