Read Sharp XV-Z91E (serv.man34) Technical Bulletin online
LV077
Sharp Electronics (UK) Ltd., Technical Services Group
<Operation of factory adjustment mode> Fig2-1
3. Software upgrade
3-(1) Connect the RS-232C cross cable with the projector and PC.
3-(2) Turn the PC on.
(**NOTE** : In this step, please do not connect the AC cord of the projector.)
3-(3) Check the serial port number of the PC
(This step is necessary only when it is your first time upgrade)
* You can check the serial port number at your PC
Please check “Control Panel” – “System” – “Device Manager” – “Port”.
* You can check the serial port number at your PC
Please check “Control Panel” – “System” – “Device Manager” – “Port”.
3-(4) Double click and start up the “FlashUpgrader.EXE”
3-(5) Choose “Serial” in the “Connection” tab.
Choose the port number you checked at 3-(3) step at the “COM Port” tab.
Choose “11520” in the “Baud Rate” tab.
Choose “11520” in the “Baud Rate” tab.
3-(6) Click the “Choose” button and choose “pwSDk.inf” in “Flash File tab”
• If FlashUpgrader.EXE and pwSDk.inf are stored in the
same folder, this step is done automatically.
Click on the first or last page to see other XV-Z91E (serv.man34) service manuals if exist.