Read Sharp XV-Z91E (serv.man30) User Guide / Operation Manual online
Maintenance &
Troubleshooting
-47
Replacing the Lamp
• Be sure to remove the lamp cage by the handle. Do not touch the glass surface of the lamp cage or the inside of the
projector.
• To avoid injury to yourself and damage to the lamp, carefully follow the steps below.
• Replace the lamp after turning off the power and unplugging the power cord.
• Replace the lamp after turning off the power and unplugging the power cord.
Removing and installing the lamp unit
CAUTION
Turn off the power.
Unplug the power cord.
4
6
Loosen the user service
screw that secures the
lamp cage cover.
screw that secures the
lamp cage cover.
5
Slide the lamp cage
cover in the direction
of the arrow.
cover in the direction
of the arrow.
1
3
Turn off the power.
2
Unplug the power cord.
Remove the Swivel
Stand. (See page 17.)
Stand. (See page 17.)
Loosen and remove the
three-securing screws
from the lamp cage.
three-securing screws
from the lamp cage.
Press POWER OFF. Wait until the
cooling fan stops running.
cooling fan stops running.
7
Remove the lamp cage.
User service screws
Insert the new lamp cage
firmly into the lamp cage
compartment.
firmly into the lamp cage
compartment.
8
9
Tighten the three-
securing screws to
fasten the lamp cage.
securing screws to
fasten the lamp cage.
Click on the first or last page to see other XV-Z91E (serv.man30) service manuals if exist.