Read Sharp XV-Z90E Handy Guide online
Lamp Replacement Procedure
Version 1.4
Issue 04/2006
Issue 04/2006
13
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
6.
Insert the new lamp unit.
•
Press the lamp unit firmly into the lamp unit compartment.
Fasten the securing screws.
Fasten the securing screws.
7.
Replace the lamp unit cover.
Note
•
If the lamp unit lamp unit cover are not correctly installed, the power will not turn on, even
if the power cord is connected to the projector.
if the power cord is connected to the projector.
Click on the first or last page to see other XV-Z90E service manuals if exist.