XV-Z90E (serv.man28). Chapter 4 - Basic operation - Sharp Projector User Guide / Operation Manual. Page 9

Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, for some signals, the optimal resolution mode
in  “Special Modes” on the “Fine Sync” menu screen
may need to be selected to match the computer display
mode.

1 Press MENU. The “Picture” menu screen appears.

2 Press 

/

 to display the “Fine Sync” menu

screen.

3 Press 

/

 to select “Special Modes”, and then

press 

.

4 Press 

/

 to select the optimal resolution.

5 Press ENTER to save the setting.

6 To exit the menu screen, press MENU.

• Avoid displaying computer patterns which repeat every other line

(horizontal stripes). (Flickering may occur, making the image hard
to see.)

• When inputting DTV 1080

I

 signal, select the corresponding type

of signal in step 4 above.

• When inputting 720P RGB signal, select the corresponding type

of signal in step 4 above.

This function allows you to check the current input signal
information.

1 Press MENU.  The “Picture” menu screen appears.

2 Press 

/

 to display the “Fine Sync” menu

screen.

3 Press  /  to select “Signal Info” to display the

current input signal.

4 To exit the menu screen, press MENU.

2,3,4

1, 6

5

2,3

1, 4