Read Sharp XV-Z90E (serv.man26) User Guide / Operation Manual online
-13
Setup & Connections
1
2 To S-video output terminal
2 To video output terminal
1
Projector
VCR, Laser disc player,
DVD player or DTV decoder
Connecting to Video Equipment
Connecting to a DVD Player and DTV Decoder
2 To component output
terminals
1
Component cable
(commercially available)
(commercially available)
DVD player
or
DTV decoder
1 Connect each RCA connector of a component cable to the corresponding
RCA INPUT 1 terminals on the projector.
2 Connect the other end of the cable to the corresponding terminals on a DVD
player or DTV decoder.
CAUTION
• Make sure to turn both the projector and the video equipment off, before
connecting.
S-video cable (commercially available)
Video cable
Projector
Connecting to a DVD player and DTV decoder with Component output (for INPUT 1)
Connecting to a DVD player and DTV decoder with component output (for INPUT 2)
1 Connect the 3 RCA to 15-pin D-Sub cable to INPUT 2 COMPONENT/RGB port on the projector.
2 Use the above cables to connect the DTV decoder or DVD player.
2 Use the above cables to connect the DTV decoder or DVD player.
When connecting this projector to analog RGB output of the DTV decoder, select “Component” for “Signal Type” on the
OSD menu or press RGB/COMP. on the remote control. (See page 36.)
OSD menu or press RGB/COMP. on the remote control. (See page 36.)
CAUTION
• Make sure to turn both the projector and the video equipment off, before connecting.
Projector
3 RCA to 15-pin D-sub cable
(sold separately AN-C3CP)
(sold separately AN-C3CP)
DVD player
or
DTV decoder
1
2
Click on the first or last page to see other XV-Z90E (serv.man26) service manuals if exist.