Read Sharp XV-Z9000E (serv.man2) Service Manual online
26
No.
Adjusting point
Adjusting conditions
Adjusting procedure
XV-Z9000U/E
14
DTV BRIGHT-
NESS adjust-
ment
(Take this
procedure for
Model XV-
Z9000U only.)
NESS adjust-
ment
(Take this
procedure for
Model XV-
Z9000U only.)
1. Feed the 100% color bar
signal (component signal)
or the 10-step gray scale
signal to the input terminal
480I.
INPUT2
or the 10-step gray scale
signal to the input terminal
480I.
INPUT2
2. Select the following group
and subject.
Group:
Group:
DVD
Subject:
BRIGHT
1. Using the control switches on the set or the buttons
on the remote control, adjust the setting until more
bit dropouts start at the 0% black level.
bit dropouts start at the 0% black level.
11
NTSC color
saturation
adjustment
saturation
adjustment
1. Check the fixed setting.
Fixed setting: 105
1. Feed the internal 8CH (split
color bar) signal.
INPUT4
INPUT4
2. Select the following group
and subject.
Group:
Group:
VIDEO1
Subject:
N-COLOR
12
PAL color
saturation
adjustment
saturation
adjustment
1. Check the fixed setting.
Fixed setting: 110
1. Feed the PAL color bar sig-
nal.
INPUT4
INPUT4
2. Select the following group
and subject.
Group:
Group:
VIDEO1
Subject:
P-COLOR
13
SECAM color
saturation
adjustment
saturation
adjustment
1. Check the fixed setting.
Fixed setting: 110
1. Feed the SECAM color bar
signal.
INPUT4
INPUT4
2. Select the following group
and subject.
Group:
Group:
VIDEO1
Subject: S-COLOR
15
DTV CONTRAST
adjustment
(Take this
procedure for
Model XV-
Z9000U only.)
adjustment
(Take this
procedure for
Model XV-
Z9000U only.)
1. Feed the 100% color bar
signal (component signal)
or the 10-step gray scale
signal to the input terminal
480I.
INPUT2
or the 10-step gray scale
signal to the input terminal
480I.
INPUT2
2. Select the following group
and subject.
Group:
Group:
DVD
Subject:
CONTRAST
1. Using the control switches on the set or the buttons
on the remote control, adjust the setting until bit drop-
outs start at the 100% white level.
outs start at the 100% white level.
16
DVD color
saturation
adjustment
DVD tint adjust-
ment
saturation
adjustment
DVD tint adjust-
ment
1. Feed the 100% color bar
signal (480I component
signal) to the Y, Pb and Pr
input terminals.
INPUT2
signal) to the Y, Pb and Pr
input terminals.
INPUT2
2. Select the following group
and subject.
Group:
Group:
DVD
Subject:
COLOR
TINT
TINT
1. Check the fixed settings.
Fixed setting:
TINT at 32
COLOR at 36
COLOR at 36
Click on the first or last page to see other XV-Z9000E (serv.man2) service manuals if exist.