XV-Z9000E (serv.man15). XVZ9000E Part 1 (1-22) - Sharp Projector User Guide / Operation Manual. Page 16

1

2 To S-video output terminal

2 To video output terminal

1

*

*

2 To component output

terminals

1

Component cable
(commercially available)

1 Connect each RCA connector of a component cable to the corresponding

RCA INPUT 1 or 2 terminals on the projector.

2 Connect the other end of the cable to the corresponding terminals on a DVD

player or DTV decoder.

When connecting this projector to a DVD player or DTV decoder, select
“Component” for “Signal Type” on the GUI menu. (See page 31.)

• Make sure to turn both the projector and the video equipment off, before

connecting.

S-video cable (commercially available)

Video cable

* The (HD/C sync) and (VD) terminals may be used depending on the specifications of the DTV decoder connected to this

projector. Please refer to the operation manual of the DTV decoder for details.

1 Connect each RCA connector to the corresponding RCA INPUT 1 or 2 terminals on the projector.
2 Connect the other end of cable to the corresponding terminals on a DTV decoder.

When connecting this projector to analog RGB output of the DTV decoder, select “RGB” for “Signal Type” on the GUI
menu. (See page 31).

2 To analog RGB

output terminals

1 D-sub/5BNC cable

(Commercially available)

Five RCA-BNC adaptors (Commercially available)

• Make sure to turn both the projector and the video equipment off,

before connecting.