XV-Z7000 (serv.man21). Complete (part1 part2) - Sharp Projector User Guide / Operation Manual. Page 46

Product type

Model

Video system

Display method

LCD panel

Lens

Projection lamp

Contrast ratio

Video input signal

S-video input signal

Component input signal

Horizontal resolution

Audio output

Computer RGB input signal

Pixel clock

Vertical frequency

Horizontal frequency

Computer control signal

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

LCD Projector
XV-Z7000E
PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43/DTV 480P/DTV 720P/DTV 1080I
LCD panel 

 3, RGB optical shutter method

Panel size: 22.9 mm (0.9

) (13.9 [H]  18.5 [W] mm)

Display method: Translucent TN liquid crystal panel
Drive method: TFT (Thin Film Transistor) Active Matrix panel
No. of dots: 480,000 dots (800 [H] 

 600 [V])

1–1.2

 zoom lens, F2.3–2.6, f  36.0–43.2 mm

DC 150 W lamp
350:1
RCA Connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 

Ω terminated

RCA Connector: AUDIO, 0.5 Vrms more than 22 k

Ω (stereo)

4-pin Mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω terminated

RCA Connector (INPUT 1 terminals)
Y: 1.0 Vp-p, sync negative, 75 

Ω  terminated

C

B

: 0.7 Vp-p, 75 

Ω  terminated

C

R

: 0.7 Vp-p, 75 

Ω  terminated

520 TV lines (DTV 720P input)
1.0 W (monaural)
15-

PIN

 

MINI

 D-

SUB

 

CONNECTOR

 (INPUT 2 port):

RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,
75 

Ω terminated

S

TEREO

 M

INIJACK

: AUDIO, 0.5 Vrms, more than 22 k

Ω (stereo)

H

ORIZONTAL

 

SYNC

. 

SIGNAL

: TTL level (positive/negative) or composite sync (Apple only)

V

ERTICAL

 

SYNC

. 

SIGNAL

: Same as above

12–108 MHz
43–85 Hz
15–80 kHz
9-pin Mini DIN female connector (RS-232C port)
2.8 cm

 (1 

7

⁄

64

) round

AC 100–240 V
2.6 A
50/60 Hz
230 W (Selecting “OFF” in the “Theater Mode”.)
200 W (Selecting “ON” in the ”Theater Mode”.)

5°C to 35°C

20°C to 60°C
Plastic
38 kHz
260 

 74  207 mm (W  H  D) (main body only)

260 

 82  207 mm (W  H  D) (including adjustment feet and projecting parts)

2.6 kg
Remote control, Two AAA size batteries, Rubber leg tips for remote control, Power cord
(1.8 m), Computer RGB cable (for Europe only), DIN-D-sub RS-232C cable (15 cm), A/V
cable, 21 pin RCA conversion adaptor (for Europe only), Extra air filter, Lens cap
(attached), Lens cap strap, Two LCD projector operation manuals
Lamp unit (Lamp/cage module) (BQC-PGC20X//1), Remote control (RRMCG1643CESA),
AAA size batteries, Rubber leg tips for remote control (GLEGG9095CEZZ), Power cord,
Computer RGB cable (QCNWG0002CEZZ), DIN-D-sub RS-232C cable (QCNW-
5288CEZZ), A/V cable (QCNW-3740CEZZ), 21 pin RCA conversion adaptor
(QSOCZ0361CEZZ), Air filter (PFILD0123CEZZ), Lens cap (PCOVZ1095CEKA), Lens cap
strap (UBNDT0013CEZZ), Two LCD projector operation manuals (TINS-7348CEZZ, TINS-
7385CEZZ)

This unit has some inactive TFTs within acceptable tolerances which
may result in illuminated or inactive dots on the picture screen. This
will not affect the picture quality or the life expectancy of the unit.

This SHARP projector uses LCD (Liquid Crystal Display) panels. These
very sophisticated panels contain 480,000 pixels (

 RGB) TFTs (Thin

Film Transistors). As with any high technology electronic equipment
such as large screen TVs, video systems and video cameras, there
are certain acceptable tolerances that the equipment must conform
to.

Specifications are subject to change without notice.