Read Sharp XV-Z7000 (serv.man2) Service Manual online
8
XV-Z7000
PG-C20X
PG-C20X
SUPPLEMENT
Keep all the other settings at default.
* Default settings
R-Gain = 10
G-Gain =
G-Gain =
9
B-Gain = 12
Smoothing Correction Value = ON
Trimming size of a recognition frame = 4
Smoothing Correction Value = ON
Trimming size of a recognition frame = 4
To save the settings and quit, click on OK
. To quit without saving them, click on Cancel
.
[Communication Setting]
Set the communication port with a projector.
This setting can be preset model by model.
A model number selected and displayed on the main screen is applied. Make sure the model number in
the main screen is the correct choice.
This setting is already made once the program has been installed. Change it only when the COM port is
different.
This setting can be preset model by model.
A model number selected and displayed on the main screen is applied. Make sure the model number in
the main screen is the correct choice.
This setting is already made once the program has been installed. Change it only when the COM port is
different.
From the menu bar, select [Setting] first and then [Model Setting].
Click on the first or last page to see other XV-Z7000 (serv.man2) service manuals if exist.