Read Sharp XV-Z21000 (serv.man7) Service Manual online
XV-Z20000/XV-Z21000/DT-5000
2 – 4
[4] Precaution on Mounting the PC I/F PWB
1. Insert the lower shield into the power supply unit.
2. Align the PC I/F PWB with the socket on the main PWB, and securely connect them by pressing the 3 socket sections from above.
3. Fit the upper shield to the lower shield.
NOTE: (1) You must pay attention to the fitting direction of the upper and lower shields (both sides). (Figures 1 and 2)
(2) The upper shield on the terminal side must not be placed on the PWB. (Figure 3)
4. Install the 2 screws (3-6).
5. Install the 4 screws (3-5).
The upper shield must be located the outer side.
The lower shield must be located
the outer side.
the outer side.
Upper shield
Lower shield
Figure 1
Hook
Hook
The lower shield must be located the outer side.
Upper shield
Lower shield
Hook
Hook
The upper shield must be located the outer side.
Figure 2
PC I/F PWB
Upper Shield
The upper shield must not be
placed on the PWB.
placed on the PWB.
Figure 3
Click on the first or last page to see other XV-Z21000 (serv.man7) service manuals if exist.