XV-Z21000 (serv.man11) - Sharp Projector User Guide / Operation Manual. Page 65

Appendix

-63

Specifi cations

Projector
XV-Z21000
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM
DTV480

I/DTV480P/DTV720P/DTV1080I/DTV1080P

DLP

®

 chip

Panel size: 0.95"
No. of dots: 2,073,600 dots (1,920 [H] 

× 1,080 [V])

1–1.35 

× zoom lens, F2.5–8, f = 38.9–52.4 mm

220 W SHP lamp 
RCA Connector: VIDEO (VIDEO), composite video, 1.0 Vp-p, sync negative, 75 

Ω termi-

nated
4-pin Mini DIN connector (S-VIDEO)
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω terminated

RCA Connector (COMPONENT/RGB1, 2)
Y: 1.0 Vp-p, sync negative, 75 

Ω  terminated

P

B

: 0.7 Vp-p, 75 

Ω  terminated

P

R

: 0.7 Vp-p, 75 

Ω  terminated

29-pin DVI-I terminal (DVI)
<Digital>
Input impedance  50 

Ω

Input level  250-1000 mV
<Analog>
Input Impedance  75 

Ω

Input level  0.7 Vp-p
<Synchronization signal>

•  Separate sync / Composite sync
  Input level  TTL level
  Input impedance  1 K

Ω

•  Green on sync
  Input level (Synchronizing input)  0.286 Vp-p
 Input 

Impedance  75 

Ω

HDMI terminal (Video signal only)
Power jack: DC 12 V output
9-pin D-sub connector (RS-232C Terminal)
520 TV lines (NTSC 3.58 input), 750 TV lines (DTV 720P input)
12–150 MHz
43–100 Hz
15–81 kHz
AC 100–240 V
3.3 A (When using AC 100 V)
50/60 Hz
320 W (Lamp Setting  “Bright”)/ 
265 W (Lamp Setting  “Eco + Quiet”) with AC 100 V 
310 W (Lamp Setting  “Bright”)/ 
260 W (Lamp Setting  “Eco + Quiet”) with AC 240 V 
0.1 W (AC 100 V, RS-232C OFF) - 0.18 W (AC 240 V, RS-232C OFF)
1,200 BTU/hour
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
18 

11

/

16

" 

× 6 

51

/

64

" 

× 16 

5

/

32

" (475 (W) 

× 172.5 (H) × 410.2 (D) mm) (main body only)

20.7 lbs. (9.4 kg)
Remote control, Power cord for Europe, except U.K., Power cord for U.K. and Singapore, 
Power cord for Australia, New Zealand and Oceania, 21 pin RCA conversion adaptor, Video 
cable, DVI to D-sub cable, Lens cap, Terminal cover, Projector operation manual

Product type

Model

Video system

Display method

DLP

®

 panel

Lens

Projection lamp

Video input signal

S-video input signal

Component input signal

Analog RGB/Digital input signal

HDMI input signal

TRIGGER terminal

Computer control signal

Horizontal resolution

Pixel clock

Vertical frequency

Horizontal frequency

Rated voltage

Input current 

Rated frequency

Power consumption

Power consumption (standby)

Heat dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Replacement parts

As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for 
product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of produc-
tion units. There may be some deviations from these values in individual units.

XVZ21000_E_Ousyu_P52-67.indd   63

XVZ21000_E_Ousyu_P52-67.indd   63

2006/07/31   19:56:43

2006/07/31   19:56:43