Read Sharp XV-Z201E (serv.man7) Service Manual online
16
XV-Z200U/E, XV-Z201E
DT-300
DT-300
8. Removing the formatter PWB.
8-1. Remove 2 screws, and remove the angle.
8-2. Remove 5 screws, and remove the blower fan unit.
8-3. Remove 2 screws, and remove the heat sink.
8-4. Remove 4 screws. Remove the backer plate M, stud
plate M, stud spring M, and 2 connectors from the
formatter PWB. After that, remove the formatter PWB.
7. Removing the each other PWBs.
7-1. Remove 1 screw, and remove front R/C receiver PWB
unit .
7-2. Remove 1 screw, and remove LED PWB unit.
7-3. Remove 1 screw, and remove a terminal-2 PWB unit.
7-4. Remove 2 screws, and remove an AC socket.
7-5. Remove 1 screw, and remove rear R/C receiver PWB
unit.
7-6. Remove 1 screw, and remove terminal-1 PWB unit.
7-2
7-1
7-3
7-4
7-5
7-6
AC Socket
Terminal-2 PWB
Front R/C Receiver PWB
Rear R/C Receiver PWB
LED PWB
Terminal-1 PWB
8-1
8-2
8-2
8-4
8-3
Blower Fan Unit
Angle
Lamp Shield
Heat Sink
Stud Spring M
Stud M
Backer Plate M
Formatter PWB
DMD
Click on the first or last page to see other XV-Z201E (serv.man7) service manuals if exist.