Read Sharp XV-Z200E Handy Guide online
Electrical Adjustments
Version 1.4
Issue 09/2006
Issue 09/2006
35
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
No.
Adjustment Items
Adjustment Conditions
Adjustment Procedures
16
DLP Voltage (Reference)
1. Read the voltage rating shown on
the DLP.
2. Make the switch setting
corresponding to the rating.
(Inside the formatter PWB)
the DLP.
2. Make the switch setting
corresponding to the rating.
(Inside the formatter PWB)
1. Perform this setting after replacement of
the DLP chip or when the combination of the
DLP chip and the formatter PWB has been
changed.
2. Rating B C D E
the DLP chip or when the combination of the
DLP chip and the formatter PWB has been
changed.
2. Rating B C D E
17
DVI digital performance
check
check
1. Receive the digital signal.
1. Make sure that the video output is normal.
18
Off-timer performance
check
check
1. Select OFF in the process mode.
Make sure that the off-timer starts with 5-
minute display, counts 1 minute in 1 second,
and turns the set off upon 0-minute display.
Make sure that the off-timer starts with 5-
minute display, counts 1 minute in 1 second,
and turns the set off upon 0-minute display.
19
Thermistor performance
check
check
1. Heat the thermistor using a dryer.
1. Make sure the "TEMP" is displayed.
22
Factory settings
1. Make the following settings.
Click on the first or last page to see other XV-Z200E service manuals if exist.