XV-Z200E (serv.man35). (5) Appendix - Sharp Projector User Guide / Operation Manual. Page 11

Product type

Model

Video system

Display method

DLP panel

Lens

Projection lamp

Video input signal

S-video input signal

Component input signal

(INPUT 1)

Component input signal

(INPUT 2)

Horizontal resolution

RGB input signal

Pixel clock

Vertical frequency

Horizontal frequency

Computer control signal

Rated voltage

Input current

Rated frequency

Power consumption

Heat dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

Projector
XV-Z200E
PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
DTV 480

I

/480P/720P/1080

I

DLP chip, RGB optical shutter method
Panel size: 0.6

⬙

Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments
Drive method: Digital Light Processing (DLP™)
No. of dots: 589,824 dots (1,024 [H] 

⳯ 576 [V])

1–1.2 

⳯ zoom lens, F1.75–2.04 f=28.0–33.5 mm

210 W/168 W SHP lamp
RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75 

Ω

terminated
4-pin Mini DIN connector (INPUT 3)
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω terminated

RCA Connector
Y: 1.0 Vp-p, sync negative, 75 

Ω  terminated

P

B

: 0.7 Vp-p, 75 

Ω  terminated

P

R

: 0.7 Vp-p, 75 

Ω  terminated

29-pin connector
DVI input signal: Digital 250–1,000 mV 50 

Ω

                           Analog 0.7 Vp-p 75 

Ω

Y: 1.0 Vp-p, sync negative, 75 

Ω terminated

P

B

: 0.7 Vp-p, 75 

Ω  terminated

P

R

: 0.7 Vp-p, 75 

Ω  terminated

520 TV lines (NTSC 3.58 input)
DVI-I terminal
<Digital>
Input impedance

50 

Ω

Input level

250-1000 mV

<Analog>
Input impedance

75 

Ω

Input level

0.7 Vp-p

<Synchronization signal>

• Separate sync/Composite sync

Input level

TTL level

Input impedance

1 K

Ω

• Green on sync

Input level (Synchronizing input)

0.286 Vp-p

Input impedance

75 

Ω

12–80 MHz
43–75 Hz
15–70 kHz
9-pin D-sub connector (RS-232C Port)
AC 100–240 V
3.2 A
50/60 Hz
285 W
1,070 BTU/hour

Ⳮ5°C to Ⳮ35°C

ⳮ20°C to Ⳮ60°C

Plastic
38 kHz
368 (W) 

⳯ 153.8 (H) ⳯ 327 (D) mm (including swivel stand)

368 (W) 

⳯ 118 (H) ⳯ 327 (D) mm (main body only)

4.6 kg (including swivel stand)
4.1 kg (main body only)
Remote control, Two AA size batteries, Power cord, 21 pin RCA conversion adaptor,
Video cable, Terminal cover, Screws for terminal cover, Lens cap (attached on the
body), Operation manual
Lamp unit (Lamp/cage module) (BQC-XVZ200++1), Remote control
(RRMCGA218WJSA), AA size batteries, Power cord for Europe except U.K.
(QACCV4002CEZZ), Power cord for U.K., Hong Kong and Singapore
(QACCBA012WJPZ), Power cord for Australia and New Zealand (QACCLA018WJPZ),
21 pin RCA conversion adaptor (QSOCZ0361CEZZ), Video cable (QCNWGA001WJZZ),
Terminal cover (GCOVAA116WJKB), Screws for terminal cover (XBBSN40P10000), Lens
cap (CCAPHA004WJ01), Operation manuals; for  European 7 languages (TINS-
B007WJZZ) / for Chinese, Korean and Arabic (TINS-B008WJZZ)

Specifications are subject to change without notice.

This SHARP projector uses a DMD chip. This very sophisticated chip contains 589,824 pixels. As with any high
technology electronic equipment such as large screen TVs, video systems and video cameras, there are certain
acceptable tolerances that the equipment must conform to.

XV_Z200E_E_p67_70.p65

03.10.30, 13:15PM

67