Read Sharp XV-Z2000E (serv.man28) User Guide / Operation Manual online
-45
Useful Features
You can adjust the computer image, match the computer display mode, and confirm the
input signal using the “Fine Sync” menu.
input signal using the “Fine Sync” menu.
Computer Image Adjustment (“Fine Sync” menu)
Adjusting the Computer
Image
Image
Use the Fine Sync function in case of irregulari-
ties such as vertical stripes or flickering in por-
tions of the screen.
ties such as vertical stripes or flickering in por-
tions of the screen.
Menu operation
Page 38
Example: “Fine Sync” menu screen for
INPUT 5 (RGB) mode
Description of Adjustment Items
Note
• You can automatically adjust the computer im-
age by setting “Auto Sync” on the “Fine Sync”
menu to “
” (ON) or pressing
on the re-
mote control. See page 46.
• “Clock”, “Phase”, “H-Pos” and “V-Pos” cannot be
used in the DIGITAL mode.
• “Clock” and “Phase” cannot be used in the Com-
ponent mode.
• The adjustable area of each item may be
changed according to the input signal.
• To reset all adjustment items, select “Reset” and
press
.
Selectable items
Clock
Phase
Clock
Phase
H-Pos
V-Pos
Description
Adjusts vertical noise.
Adjusts horizontal noise (similar to
tracking on your VCR).
Centres the on-screen image by moving
it to the left or right.
Centres the on-screen image by moving
it up or down.
Adjusts horizontal noise (similar to
tracking on your VCR).
Centres the on-screen image by moving
it to the left or right.
Centres the on-screen image by moving
it up or down.
Special Modes Setting
Ordinarily, the type of input signal is detected and
the correct resolution mode is automatically se-
lected. However, for some signals, the optimal
resolution mode in “Special Modes” on the “Fine
Sync” menu may need to be selected to match
the computer display mode.
the correct resolution mode is automatically se-
lected. However, for some signals, the optimal
resolution mode in “Special Modes” on the “Fine
Sync” menu may need to be selected to match
the computer display mode.
Menu operation
Page 40
Example: “Fine Sync” menu screen for
INPUT 5 (Component) mode
Note
• If your computer displays patterns which repeat
every other line (horizontal stripes), flickering
may occur which makes the image hard to see.
may occur which makes the image hard to see.
• When inputting DTV 1080
I
signal, select the
corresponding type of signal.
• See “Checking the Input Signal” on the next
page for information on the currently selected
input signal.
input signal.
XV-Z2000E_E_P38_46.p65
2004.10.20, 0:04 PM
45
Click on the first or last page to see other XV-Z2000E (serv.man28) service manuals if exist.