Read Sharp XV-Z2000E (serv.man12) Service Manual online
43
XV-Z2000
DT-400
DT-400
Checking the SOG Circuit
Measure the pin (7) of IC5001
with an oscilloscope.
with an oscilloscope.
This is the failure of the SOG
synchronization separator circuit.
synchronization separator circuit.
Is there the Y signal including sync
signal?
signal?
Measure the pin (2) of Q5001
with an oscilloscope.
with an oscilloscope.
Is the composite synchronized
signal regenerated at proper timing?
signal regenerated at proper timing?
NO
Is there any output from the pin
(25) of IC3102?
(25) of IC3102?
NO
The SOG circuit is normal.
End.
YES
YES
YES
Check Q3110 and its
peripheral ciruits.
peripheral ciruits.
NO
Click on the first or last page to see other XV-Z2000E (serv.man12) service manuals if exist.