Read Sharp XV-Z1E Service Manual online
XV-Z1E/A
9
Before starting this job, detach the lamp cage unit and the filter cover.
1. Removing the top cabinet
1-1. Remove the three screws at the carrying handle side.
1-2. Remove the two screws at the terminals side.
1-3. Detach the terminal door, and remove the four screws off the terminal cover.
1-4. Slowly lift the back of the top cabinet and disconnect the operation key unit connector (KY). Pull up and away
1-3. Detach the terminal door, and remove the four screws off the terminal cover.
1-4. Slowly lift the back of the top cabinet and disconnect the operation key unit connector (KY). Pull up and away
the top cabinet.
1-5. Place the top cabinet upside down. Remove the four screws off the operation key unit. Take out the operation
key unit.
REMOVING OF MAJOR PARTS
1-1
1-2
1-4
1-3
1-2
(KY)
Terminal Door
Top Cabinet
Click on the first or last page to see other XV-Z1E service manuals if exist.