XV-Z12000 (serv.man34). Basic operation - Sharp Projector User Guide / Operation Manual. Page 3

Read Sharp XV-Z12000 (serv.man34) User Guide / Operation Manual online

Basic Operation
-35
3
Press 
 or 
on the remote control or 
 on
the projector to select the IN-
PUT mode.
• After pressing   once on the projector,
use 
 to select the desired input mode.
Note
• When no signal is received, “NO
SIGNAL” will be displayed. When a
signal that the projector is not pre-
set to receive is received, “NOT
REG.” will be displayed.
• The INPUT mode is not displayed
when “OSD display” is set to “Level
A” or “Level B”. (See page 68.)
About the INPUT modes
"On-screen Display (Example)
Using RGB*
Using
Component
INPUT 2 mode
Using
Component
INPUT 1 mode
INPUT 3 mode
INPUT 4 mode
Using RGB*
INPUT 5 mode
* Input the RGB signal of the DTV, not
the computer.
Using S-Video
Using Video
Using Analog
RGB
The display varies accord-
ing to the “Signal Type” with
the INPUT 5.  The diagram
shown above is the ex-
ample of having selected
“Analog RGB”.
Used for projecting images
from equipment that sends
component signals or RGB
signals connected to the
INPUT 1 or 2 terminals.
Used for projecting im-
ages from equipment con-
nected to the S-VIDEO in-
put terminal.
Used for projecting im-
ages from equipment
connected to the VIDEO
input terminal.
Used for projecting im-
ages from equipment
connected to the DVI in-
put terminal.
INPUT 1
INPUT 2
(Compo-
nent/RGB*)
INPUT 3
(S-Video)
INPUT 4
(Video)
INPUT 5
(Digital PC
RGB/
Digital PC
Component/
Digital Video
RGB/Digital
Video
Component/
Analog RGB/
Analog
Component)
XV_Z12000E_E_p33_41.p65
03.10.27, 10:42 AM
35
Page of 28
Display

Click on the first or last page to see other XV-Z12000 (serv.man34) service manuals if exist.