Read Sharp XV-Z12000 (serv.man33) User Guide / Operation Manual online
Component cable
(commercially available)
DVD player or
DTV* decoder
DTV* decoder
Connecting to
Component Video
Equipment Using a
Component Cable
(INPUT 1 or 2)
Component Video
Equipment Using a
Component Cable
(INPUT 1 or 2)
Use a component cable when connecting the
component video equipment such as DVD play-
ers and DTV* decoders to INPUT 1 or 2 termi-
nals.
component video equipment such as DVD play-
ers and DTV* decoders to INPUT 1 or 2 termi-
nals.
* DTV is the umbrella term used to describe the
new digital television system in the United States.
1
Connect a component cable to
the projector.
the projector.
2
Connect the above cable to the
component video equipment.
component video equipment.
Note
• When connecting the projector to the
video equipment in this way, select “Com-
ponent” for “Signal Type” in the “Options”
menu, or select the Component mode by
pressing
ponent” for “Signal Type” in the “Options”
menu, or select the Component mode by
pressing
on the remote control. See
page 69.
• Set the “Resolution” of “Special Modes”
to “480P” during input of a 480P signal.
See page 58.
See page 58.
To analog component
output terminal
output terminal
Connecting the Projector to Other Devices
To INPUT 1 or 2 terminals
-18
XV_Z12000E_E_p15_26.p65
03.10.27, 10:40 AM
18
Click on the first or last page to see other XV-Z12000 (serv.man33) service manuals if exist.