XV-Z12000 (serv.man31). Lamp Installation - Sharp Projector User Guide / Operation Manual

xv-z12000 (serv.man31) user guide / operation manual
Model
XV-Z12000 (serv.man31)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
494.08 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Projector / Lamp Installation
File
xv-z12000-sm31.pdf
Date

Read Sharp XV-Z12000 (serv.man31) User Guide / Operation Manual online

STANDBY button
User service screws
Removing and Installing the
Lamp Unit
Info
• Be sure to remove the lamp unit by the handle. Be
sure not to touch the glass surface of the lamp unit
or the inside of the projector.
• To avoid injury to yourself and damage to the lamp,
be sure to carefully follow the steps below.
• Do not loosen other screws except for the lamp
unit cover and lamp unit. (Only the silver screws
are loosened).
1
Press 
STANDBY
 on the projector or 
 on
the remote control to put the projec-
tor into the standby mode.
• Wait until the cooling fan stops.
2
Disconnect the power cord.
• Unplug the power cord from the AC socket.
• Leave the lamp until it has fully cooled down
(about 1 hour).
3
Remove the lamp unit cover.
• Loosen the user service screws that secure the
lamp unit cover. Then open the cover in the di-
rection of the arrow.
User service screws
AC socket
Handle
AC socket
1
2
4
Remove the lamp unit.
• Remove the securing screws from the lamp
unit. Hold the lamp unit by the handle and pull
it in the direction of the arrow.
5
Insert the new lamp unit.
• Press the lamp unit firmly into the lamp unit
compartment. Fasten the securing screws.
6
Attach the lamp unit cover.
• Close the lamp unit cover in the direction of the
arrow (to the close mark) on the side of the pro-
jector. Then tighten the user service screws.
Info
• If the lamp unit and lamp cover are not correctly
installed, the power will not turn on, even if the power
cord is connected to the projector.
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
1
Connect the power cord.
• Plug the power cord into the AC socket of the
projector.
2
  Reset the lamp timer.
• While holding down 
, " and | on the pro-
jector, press 
 on the projector.
• “LAMP 0000H” is displayed, indicating that the
lamp timer is reset.
Info
• Make sure to reset the lamp timer only when re-
placing the lamp. If you reset the lamp timer and
continue to use the same lamp, this may cause the
lamp to become damaged or explode.
INSTALLATION MANUAL
CAUTION:
••••• Potential hazard of glass particles if lamp ruptures. Please have Sharp Authorized Projector Dealer or
Service Center* replace lamp if rupture occurs.
••••• Do not remove the lamp unit directly after operation of the projector. The lamp may be extremely hot. Wait at
least one hour after the power cord is disconnected to allow the surface of the lamp unit to fully cool before
removing the lamp unit.
■ It is recommended that the lamp be replaced after approximately 1,900 cumulative hours of use or when you notice a
significant deterioration of the picture and color quality. The lamp usage time can be checked with the on-screen display.
■ For lamp replacement, please consult your nearest Sharp Authorized Projector Dealer or Service Center*.
IMPORTANT NOTE TO U.S. CUSTOMERS:
The lamp included with this projector is backed by a 90-day parts and labor limited warranty. All service of this
projector under warranty, including lamp replacement, must be obtained through a Sharp Authorized Projector
Dealer or Service Center*. For the name of the nearest Sharp Authorized Projector Dealer or Service Center*,
please call toll-free: 1-877-DTV-SHARP (1-877-388-7427).
Hg LAMP CONTAINS MERCURY For State Lamp Disposal Information
www.lamprecycle.org or 1-800-BE-SHARP
U.S.A. ONLY
* Confirm the name of the Dealer or Service Center referring to your projector operation manual.
Printed in Japan
TINS-B403WJZZ
04P06-JWM
LAMP UNIT (LAMP/CAGE MODULE) FOR PROJECTOR
Model
 
AN-K12LP
(BQC-XVZ100005)
AN-K12LP_Lamp_E_B&W.p65
04.5.18, 11:21 AM
1
Für Anweisungen in Ihrer Sprache siehe Benutzerhandbuch im PDF-For-
mat auf der mit dem Projektor mitgelieferten CD-ROM.
Sie können das PDF-Benutzerhandbuch auch aus dem Internet
herunterladen (http://sharp-world.com/products/index.html).
DEUTSCH
Pour des instructions dans votre langue, reportez-vous au mode d’emploi
PDF contenu dans le CD-ROM fourni avec le projecteur.
Vous pouvez également télécharger le mode d’emploi PDF d’Internet
(http://sharp-world.com/products/index.html).
FRANÇAIS
Para recibir instrucciones en su idioma, consulte el manual de manejo
PDF que se encuentra en el CD-ROM suministrado con el proyector.
También puede descargar el manual de manejo PDF de Internet
(http://sharp-world.com/products/index.html).
ESPAÑOL
Per ricevere istruzioni nella propria lingua, fare riferimento al manuale
d’uso in formato PDF incluso nel CD-ROM fornito con il proiettore.
È possibile, inoltre, scaricare lo stesso manuale d’uso da Internet dal sito
http://sharp-world.com/products/index.html .
ITALIANO
Voor aanwijzingen in uw taal verwijzen wij u naar de PDF-
gebruiksaanwijzing op de CD-ROM die bij de projector wordt geleverd.
U kunt de PDF-gebruiksaanwijzing ook vanaf internet downloaden
(http://sharp-world.com/products/index.html).
NEDERLANDS
Vi hänvisar till de PDF-filer som återfinns på den medföljande CD-ROM-
skivan för en bruksanvisning på önskat språk.
En bruksanvisning av formatet PDF kan också nerladdas från Internet
(http://sharp-world.com/products/index.html).
SVENSKA
Para instruções no seu idioma, consulte o manual de operação em PDF
contido no CD-ROM fornecido com o projetor.
Pode-se também baixar o manual de operação em PDF pela internet
(http://sharp-world.com/products/index.html).
PORTUGUÊS
LampManualXR1S
04.4.23, 2:29 PM
4-5
Page of 2
Display

Download Sharp XV-Z12000 (serv.man31) User Guide / Operation Manual

Here you can read online and download Sharp XV-Z12000 (serv.man31) User Guide / Operation Manual in PDF. XV-Z12000 (serv.man31) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp XV-Z12000 (serv.man31) Projector. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.