Read Sharp XV-Z10E (serv.man7) Service Manual online
9
XV-Z10E
OPERATION MANUAL
Projector (Front and Top View)
ON button
For turning the power on.
STANDBY button
For putting the projector into
the standby mode.
Power indicator
Lamp indicator
Temperature warning
indicator
UNDO button
For undoing an operation
or returning to the
previous display.
INPUT button
For switching input mode
1, 2 or 3.
For switching input mode
1, 2 or 3.
Volume buttons
For adjusting the speaker
sound level.
For adjusting the speaker
sound level.
Adjustment buttons
(
(
'"\ |
)
•
For selecting menu items.
•
For adjusting the Keystone
Correction when in the
Keystone Correction mode.
Keystone Correction mode.
ENTER button
For setting items selected
or adjusted on the menu.
For setting items selected
or adjusted on the menu.
MENU button
For displaying adjustment
and setting screens.
For displaying adjustment
and setting screens.
Lens shift lever
For adjusting the
projection position
by moving the lens
up and down and
left and right (360
For adjusting the
projection position
by moving the lens
up and down and
left and right (360
°
).
RESIZE button
For switching the picture display
(STRETCH, SIDE BAR, etc.).
For switching the picture display
(STRETCH, SIDE BAR, etc.).
Remote control
sensor
Zoom knob
For adjusting the
projected image size.
Lamp indicator
Power indicator
Temperature
warning indicator
HEIGHT ADJUST
button
Front adjustment
foot
(on the bottom of
the projector)
Focus ring
For bringing the
projected image
into the focus.
For bringing the
projected image
into the focus.
Intake vent
Speaker
Attaching and removing the lens cap
•
Press on the two buttons of the lens cap
and attach it to the lens, then release the
buttons to lock it in place.
and attach it to the lens, then release the
buttons to lock it in place.
•
Press on the two buttons of the lens cap
and remove it from the lens.
and remove it from the lens.
10
XV-Z10E
About the Indicators on the Projector
Attaching and Removing the Lens Shipping Block
When attaching the lens shipping block, be sure to return the lens shift
lever to the centre position. If the lens is shifted upwards or downwards,
the lens shipping block cannot be attached.
lever to the centre position. If the lens is shifted upwards or downwards,
the lens shipping block cannot be attached.
Power indicator
Temperature
warning
indicator
warning
indicator
Lamp indicator
Temperature
warning indicator
Lamp indicator
Power indicator
Maintenance indicators
Power indicator
Lamp indicator
Temperature
warning indicator
warning indicator
Status of the lamp
Green on/Red on ... Normal
Red blinks ... Abnormal
Red blinks ... Abnormal
Green on ... Normal
Green blinks ... The lamp is warming up.
Red on ... Change the lamp.
Green blinks ... The lamp is warming up.
Red on ... Change the lamp.
Off ... Normal
Red on ... The internal temperature is
Red on ... The internal temperature is
abnormally high.
11
XV-Z10E
Projector (Rear View)
Remote control sensor
RS-232C terminal
Connecting the
computer to control the
projector.
computer to control the
projector.
Kensington Security
Standard connector
Standard connector
INPUT 3 terminal
Connecting video equipment without
S-video output terminal.
S-video output terminal.
INPUT 1 terminal
Connecting video equipment
with component output
terminal (DVD player, DTV
decoder, etc.).
Connecting the computer.
with component output
terminal (DVD player, DTV
decoder, etc.).
Connecting the computer.
INPUT 2 terminal
Connecting video equipment with
S-video output terminal (VCR,
DVD player, etc.).
S-video output terminal (VCR,
DVD player, etc.).
AUDIO INPUT terminal
Connecting an audio cable
(Shared audio input terminal
for INPUT 1, 2 and 3).
(Shared audio input terminal
for INPUT 1, 2 and 3).
Using the Kensington Lock
•
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
12
XV-Z10E
Remote Control (Front View)
STANDBY button
For putting the projector into the
standby mode.
KEYSTONE button
For entering the Keystone
Correction mode.
UNDO button
For undoing an operation or
returning to the previous display.
Volume buttons
For adjusting the speaker sound
level.
AUTO SYNC button
For automatically adjusting images
when connected to a computer.
RGB/COMP. button
For switching the signal type (RGB
or Component).
INPUT buttons
For switching to the respective
input modes.
MENU button
For displaying adjustment and
setting screens.
setting screens.
Remote control signal
transmitters
transmitters
ON button
For turning the power on.
Adjustment buttons
(
(
' " \ |
)
•
For selecting menu items.
•
For adjusting the Keystone
Correction when in the Keystone
Correction mode.
Correction when in the Keystone
Correction mode.
FREEZE button
For freezing images.
PICTURE SETTING button
For selecting the memory
location.
location.
RESIZE button
For switching the picture display
(STRETCH, SIDE BAR, etc.).
(STRETCH, SIDE BAR, etc.).
MUTE button
For temporarily turning off the
sound.
sound.
ENTER button
For setting items selected or
adjusted on the menu.
adjusted on the menu.
