XV-Z10E (serv.man28) - Sharp Projector User Guide / Operation Manual. Page 69

Width and height ratio of an image. The normal
aspect ratio of a computer and video image is 4:3.
There are also wide images with an aspect ratio
of 16:9 and 21:9.

Optimises projected computer images by auto-
matically adjusting certain characteristics.

Initial setting image projected when no signal is
being output.

Mode that cuts out the top/bottom blank bands
and projects a wide screen image.

Clock adjustment is used to adjust vertical noise
when clock level is incorrect.

Function that can be used to adjust the colour tem-
perature to suit the type of image input to the pro-
jector. Decrease the colour temperature to create
warmer, reddish images for natural flesh tones,
or increase to create cooler, bluish images for a
brighter picture.

Image quality enhancement function that offers a
richer image by brightening the darker portions of
the image without altering the brightness of the
brighter portions. You can select four different
modes: Standard, Cinema1, Cinema2 and
Brighten.

Function to digitally correct a distorted image
when the projector is set up at an angle.

Function to adjust the position of the projection
image by using the lens shift lever to move the
lens from side to side and up and down (360

°).

Phase shift is a timing shift between isomorphic
signals with the same resolution. When phase level
is incorrect, the projected image typically displays
horizontal flicker.

Controls the projector from the computer.

Allows you to modify or customize the picture dis-
play mode to enhance the input image. You can
select three different modes: STRETCH, SIDE
BAR and CINEMA ZOOM.

Mode that displays the image fully on a 16:9
screen.

XV_Z10E_E_p63_71.p65

03.11.7, 4:19 PM

67