Read Sharp XV-Z10000 (serv.man10) Service Manual online
26
XV-Z10000
1. Make the following settings.
Destination
Adjustment process Remote control setting
North America
S4
Factory setting 4
Europe
S3
Factory setting 3
18
Delivery set-
tings
tings
15
Off-timer per-
formance
formance
1. Select OFF from the process mode LINE.
Make sure the off-timer starts with 5 minutes onscreen
and the set turns itself off in 5 minutes.
and the set turns itself off in 5 minutes.
16
Thermistor
performance
checking
performance
checking
1. Make sure that the temperature is indicated.
1. Heat the thermistor with a
hair dryer.
17
Auto sync
performance
checking
performance
checking
1. In the VGA, SVG Aand XGAmodes, make sure the
Clock, Phase, H-Pos and V-Pos settings can be au-
tomatically adjusted.
tomatically adjusted.
1. Feed the phase check pat-
tern signal.
No.
Adjusting point
Adjusting conditions
Adjusting procedure
No.
Adjusting point
Adjusting conditions
Adjusting procedure
19
Inspection of
HTPC720P
HTPC720P
Check that there is no abnormality with the screen.
At INPUT 5 (DVI-1 connector)
1. Receive the color bar sig-
1. Receive the color bar sig-
nal.
2. Receive the gray scale sig-
nal.
3. Receive the SMPTERP-
133 signal.
Click on the first or last page to see other XV-Z10000 (serv.man10) service manuals if exist.