Read Sharp XV-Z100 Handy Guide online
Replacing the DMD Chip
Version 1.1
Issue 04/2006
Issue 04/2006
31
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Replacing the DMD Chip
If shading shown in Figure 1 appears on the screen after replacing DMD, turn the adjustment
screw of the optical engine to adjust the lighting area of DMD.
1. Loosen the adjustment lever fixing screw 1. After adjusting the lighting area with the
adjustment lever 2, tighten the adjustment lever fixing screw 1.
screw of the optical engine to adjust the lighting area of DMD.
1. Loosen the adjustment lever fixing screw 1. After adjusting the lighting area with the
adjustment lever 2, tighten the adjustment lever fixing screw 1.
Click on the first or last page to see other XV-Z100 service manuals if exist.