XV-C2E (serv.man3). Service manual part two - Sharp Projector Service Manual (repair manual). Page 4

Read Sharp XV-C2E (serv.man3) Service Manual online

XV-C2E
18
No.
Adjustment Item
Adjustment Conditions
Adjustment Procedure
16
Brightness
adjustment
(DAC) (gamma
correction off)
Note :
After this
adjustment, go
back to Item 15
"Gain adjustment".
Readjust the gain
level.
1. Receive the 10-step pattern signal.
2. Connect the dual-beam oscilloscope
between pin (2) [pin (1) for red, pin (3)
for blue] of P4303 and GND.
3. Press S2001 to call up the ADJ IN
mode and select the following subject.
Group : VIDEO 1
Subject : BRIGHT(G), R-BRT, B-BRT
• Using the 
'
 and 
"
 keys, adjust the
difference between the 100% white
level and the pedestal level to
5.9±0.1 Vp-p.
17
Gamma
adjustment
(DAC) (gamma
correction off)
1. Receive the NTSC 10-step pattern
signal.
2. Connect the dual-beam oscilloscope
between pin (2) of P4303 and GND.
3. Press S2001 to call up the ADJ IN
mode and select the following subject.
Group : VIDEO 4
Subject : RGB GAM1, RGB CTR1
4. Connect the dual-beam oscilloscope
between pin (1) of P4303 and GND.
5. Press S2001 to call up the ADJ IN
mode and select the following subject.
Group : VIDEO 4
Subject : R GAM1, R CTR1
6. Connect the dual-beam oscilloscope
between pin (1) of P4303 and GND.
7. Press S2001 to call up the ADJ IN
mode and select the following subject.
Group : VIDEO 4
Subject : B GAM1, B CTR1
• Using the 
'
 and 
"
 keys, adjust the
second-tone level to 4.2±0.1 Vp-p
and the black level to 3.0±0.1 Vp-p.
18
SID signal level
adjustment
1. Receive the NTSC 10-step pattern
signal.
2. Connect the dual-beam oscilloscope
between pin (6) of P4303 and GND.
3. Press S2001 to call up the ADJ IN
mode and select the following subject.
Group:
VIDEO 3
Subject: SID CTR
• Using the 
'
 and 
"
 keys, adjust the
waveform’s top and bottom levels
from its center level to 4.0±0.1 Vp-p.
GND
GND
Black level
Second-tone level
4.0V
4.0V
Page of 9
Display

Click on the first or last page to see other XV-C2E (serv.man3) service manuals if exist.