Read Sharp XR-20S Handy Guide online
Lamp Replacement Procedure
Version 1.1
Issue 04/2006
Issue 04/2006
13
SHARP ELECTRONICS (UK) LTD
PROJECTOR TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Resetting the Lamp Timer
Reset the lamp timer after replacing the lamp.
1.
Connect the power cord.
•
Plug the power cord into the AC socket of the
projector.
projector.
2.
Reset the lamp timer.
•
While pressing simultaneously “DOWN”,
“MENU” and “ENTER” on the projector, press
“ON”.
“MENU” and “ENTER” on the projector, press
“ON”.
•
“LAMP 0000H” is displayed, indicating that the
lamp timer is reset.
lamp timer is reset.
Note
•
Make sure to reset the lamp timer only when
replacing the lamp. If you reset the lamp timer
and continue to use the same lamp, this may
cause the lamp to become damaged or
explode.
replacing the lamp. If you reset the lamp timer
and continue to use the same lamp, this may
cause the lamp to become damaged or
explode.
Click on the first or last page to see other XR-20S service manuals if exist.