XG-XV2E (serv.man2). Service manual part one - Sharp Projector Service Manual (repair manual). Page 12

4-1. Put a bladed screwdriver in the rightmost hole of the screws cover. Pull and unlock the right end of the

screws cover, and pull and detach the entire screws cover.

4-2. Remove the twelve side screws.
4-3. Remove the two screws off the side cabinet.
4-4. Disconnect the video terminal cover.
4-5. Disconnect the membrane switch connector.
4-6. Pull down and detach the left side cabinet.
4-7. Remove the two screws off the LED PWB assembly.

4-2

4-4

4-2

4-2

4-6

4-3

4-5

4-3

4-7

LED Unit

Left-Side
Cabinet

Video Terminal Cover
(attached only when the video
board unit is not used)

4-4

4-2

4-2

4-1

Video Board Unit
(for XG-XV2M as 
well as Australian 
and NewZealand 
versions of 
XG-XV2E)

Video Terminal Cover
(for XG-XV2M as well as 
Australian and NewZealand 
versions of XG-XV2E)