XG-V10XE (serv.man8). Intro and contents - Page 1-19 - Sharp Projector Service Manual (repair manual). Page 18

5-1. Remove the lock screw from the socket holder (with shorter lead) for the lamp unit 1. Slide sideway and

detach the holder.

5-2. Remove the lock screw from the socket holder (with longer lead) for the lamp unit 2. Slide sideway and detach

the holder.

5-3. Disconnect the connectors from the power/ballast PWB unit assembly.
5-4. Remove the six lock screws from the power/ballast PWB unit assembly. Lift and detach this assembly.

6-1. Remove the three lock screws from the left-side panel at the inlet PWB unit assembly.
6-2. Disconnect the connectors from the inlet PWB unit assembly.
6-3. Remove the two lock screws from the bottom panel at the inlet PWB unit assembly. Lift and detach this

assembly.

7-1. Remove the five lock screws from the lamp fan assembly.
7-2. Remove the seven lock screws

from the optical mechanism unit.
Lift and detach this unit.

5-1

5-3

5-3

5-2

7-1

5-4

6-3

(PA)

(EC)

6-1

6-2

7-2

7-1

(BB)

(EA)

(PL)

(F7)

(F6)

7-1

Power/ballast PWB 
unit assembly

Lamp fan assembly

Optical mechanism unit

Left-side panel

Inlet PWB unit assembly

Bottom panel