Read Sharp XG-V10XE (serv.man32) User Guide / Operation Manual online
71
Transferring Images
Saving a Custom Image as Startup Image and Background Image
The projector has an option to display a custom image (e.g. your company
logo) upon startup of the projector (Startup Image) or when there is no
signal (Background Image).
You can choose your custom image from the projector’s mode menu.
Refer to the projector’s operation manual for how to set Startup Image
and Background Image.
The following is the procedure for saving the custom image on the
projector.
logo) upon startup of the projector (Startup Image) or when there is no
signal (Background Image).
You can choose your custom image from the projector’s mode menu.
Refer to the projector’s operation manual for how to set Startup Image
and Background Image.
The following is the procedure for saving the custom image on the
projector.
●
Use BMP files satisfying the conditions described below as the custom
images for the
images for the
Startup Image
and
Background Image
.
•
Images with a size of 1280
×
1024 or smaller (when using the
XG-V10 series projector)
•
Images with a size of 1024
×
768 or smaller (when using models
other than the XG-V10 series projector)
•
Images using 240 colours or less. (Images using over 240 colours
are automatically reduced to 240 colours.)
are automatically reduced to 240 colours.)
●
Selecting and leading the custom image file as Startup Image and
Background Image
Background Image
can be done by Presentation Transfer or
Capture & Transfer
.
Select “Custom Image Transfer” in “Transfer Mode” of the
“Presentation Transfer” window or of the “Capture & Transfer”
window.
Refer to “Transferring Images”
“Presentation Transfer” window or of the “Capture & Transfer”
window.
Refer to “Transferring Images”
(page 64)
for how to transfer the image.
The “Custom Image Transfer” mode saves one image file only and
overwrites the previously transferred image if you send another image
file.
To avoid erasing the custom image, you should change the transfer
mode to “Image Transfer” after sending the custom image.
overwrites the previously transferred image if you send another image
file.
To avoid erasing the custom image, you should change the transfer
mode to “Image Transfer” after sending the custom image.
Saving a Custom
Image
Click on the first or last page to see other XG-V10XE (serv.man32) service manuals if exist.