XG-V10XE (serv.man27). - Operation Buttons - Sharp Projector User Guide / Operation Manual. Page 8

You can use the remote control as a remote mouse to operate computers
compatible with PS/2 or USB type mouse systems.

1 Connect one end of the supplied USB mouse control cable to the corresponding terminal on the computer.
2 Connect the other end to the USB port on the remote mouse receiver.

USB mouse control
cable

Remote mouse
receiver

Use the USB port
(PC or Macintosh) to
connect the supplied
USB mouse control
cable to the remote
mouse receiver.

1 Turn off the power of the PC.
2 Connect one end of the supplied PS/2 mouse control cable to the corresponding terminal on the PC.
3 Connect the other end to the PS/2 port on the remote mouse receiver.
4 Turn on the power of the PC.

• Do not connect or disconnect the mouse control cables to or from the computer while it is on.

This may damage your computer.

• Do not connect both the PS/2 and USB mouse control cables to the remote mouse receiver.
• Windows 95 does not support USB mouse driver software.
• The minimum system requirements for the USB type mouse system are shown below.

Windows
Hardware: PC/AT compatible machine with USB port that has Windows 98/Windows NT 5.0 or

higher installed.

OS: Windows 98/Windows NT 5.0 or higher
Macintosh
Hardware: Macintosh series with USB port
OS: Mac OS 8.5 or higher

Remote mouse
receiver

PS/2 mouse control
cable

Use the PS/2 port
(PC) to connect the
supplied PS/2 mouse
control cable to the
remote mouse
receiver.