XG-V10WE (serv.man8). Service Manual text - Page 1-59 - Sharp Projector Service Manual (repair manual). Page 38

(1) If the convergence gets out of spec during servicing, call up the process mode and select the following sub-

jects.
Group

: NOKO

Subject

: R-CNV-H, R-CNV-V

G-CNV-H, G-CNV-V
B-CNV-H, B-CNV-V

(H: Horizontal adjustment, V: Vertical adjustment)

Adjust the above settings in the range of 0-4. When changing each setting from the initial setting of 2, however,
the 1280 x 1024 dot display area will have a fewer number of lines.

Example 1 : When the R-CNV-H setting is changed from 2 (initial) to 4, the number of lines will be from 1280 to

1278.

Example 2 : When the R-CNV-H, G-CNV-H and B-CNV-H settings are changed to 3, 3 and 4, respectively, the

display will be 1278 x 1024 lines. But when the above settings are switched to 2, 2 and 3, respec-
tively, the display will be 1279 x 1024 lines.

(2) When calling up the process mode, make sure the following appears onscreen.

Group

: VIDEO1

Subject

: SET UP B 2

SET UP C 1

Be sure to exit from this mode with the following onscreen.
Subject

: SET UP 1