XG-PH70X (serv.man10) - Sharp Projector User Guide / Operation Manual

xg-ph70x (serv.man10) user guide / operation manual
Model
XG-PH70X (serv.man10)
Pages
15
Size
1.15 MB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Projector
File
xg-ph70x-sm10.pdf
Date

Read Sharp XG-PH70X (serv.man10) User Guide / Operation Manual online

XG-PH70X/XG-PH70X-N
1 – 1
XG-PH70X
Service Manual
 
CHAPTER 1. 
OPERATION MANUAL
[1] SPECIFICATIONS
Multimedia Projector
XG-PH70X (standard zoom lens attached)/XG-PH70X-N (no lens attached)
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480I /DTV480P/DTV540P/DTV576I /DTV576P/DTV720P/DTV1035I /DTV1080I
0.7" DLP chip x 1
No. of dots: 786,432 dots (1,024 [H] x 768 [V])
1.2 x electric zoom/focus lens, F1.8
−F2.0, f = 25.6−31.3 mm (standard equipment with XG-PH70X)
260 W x 2
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75
Ω terminated
P
B
: 0.7 Vp-p, 75
Ω terminated
P
R
: 0.7 Vp-p, 75
Ω terminated
750 TV lines (DTV720P)
BNC connector
Y: 1.0 Vp-p, sync negative, 75
Ω terminated
P
B
: 0.7 Vp-p, 75
Ω terminated
P
R
: 0.7 Vp-p, 75
Ω terminated
15-pin mini D-sub connector, 5 BNC connector: RGB separate/composite sync (TTL)/sync
on green type analog input: 0Ð0.7 Vp-p, positive, 75
Ω terminated
Horizontal sync. signal: TTL level (positive/negative) or composite sync (Apple only)
Vertical sync. signal: Same as above
DVI connector (24-pin), RGB (digital), 250
− 1,000 mV, 50 Ω (Compatible with HDCP)
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75
terminated
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω terminated
φ3.5 mm stereo minijack, RCA terminal
0.5 Vrms, more than 22 k
φ3.5 mm minijack
0.5 Vrms, less than 2.2 k
9-pin D-sub connector
8-pin RJ-45 modular connector
12
−230 MHz
43
−200 Hz
15
−126 kHz
3.0 W (stereo)
3.3 cm round x 2
AC 100
−240 V
6.6 A (AC 100 V)
−2.7 A (AC 240 V)
50/60 Hz
650 W (when "Eco Mode" is "OFF")/570 W (when "Eco Mode" is "ON") with AC 100 V
620 W (when "Eco Mode" is "OFF")/550 W (when "Eco Mode" is "ON") with AC 240 V
0.8 W (AC 100 V)
− 1.1 W (AC 240 V) (When "Monitor Out" and "LAN/RS232C" are set to "Disable".)
2,440 BTU/hour (when "Eco Mode" is "OFF")/2,140 BTU/hour (when "Eco Mode" is "ON")
with AC 100 V
2,330 BTU/hour (when "Eco Mode" is "OFF")/2,070 BTU/hour (when "Eco Mode" is "ON")
with AC 240 V
41 F to 104 F (+5 C to +40 C)
−4 F to 140 F (−20 C to +60 C)
Plastic
38 kHz
16
5
/
32
" x 7
3
/
32
" x 18
35
/
64
" (410 (W) x 180 (H) x 471 (D) mm) (main body only)
16
5
/
32
" x 7
37
/
64
" x 18
35
/
64
" (410 (W) x 192.1 (H) x 471 (D) mm) (including adjustment foot
and projecting parts)
XG-PH70X: 32.9 lbs. (14.9 kg)
XG-PH70X-N: 30.3 lbs. (13.7 kg)
Remote control, Power cord for U.S., Canada, etc., Power cord for Europe, except U.K.,
Power cord for U.K., Hong Kong and Singapore, Power cord for Australia, New Zealand and
Oceania, RGB cable, Remote mouse receiver, Cap for the standard zoom lens, Projector
manual and technical reference CD-ROM, Operation manual
Product type
Model
Video system
Display device
Standard zoom lens
Projection lamp
Component input (INPUT 1)/
output (OUTPUT) signal
Horizontal resolution
Component input (INPUT 2)
signal
RGB input (INPUT 1/2)/output
(OUTPUT) signal
RGB digital input signal (INPUT 3)
Video input signal
(INPUT 4)
S-video input signal
(INPUT 5)
Audio input signal
Audio output signal
(AUDIO OUTPUT 1
−5)
RS-232C terminal
LAN terminal
Pixel clock
Vertical frequency
Horizontal frequency
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Replacement parts
As a part of policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
®
XG-PH70X/XG-PH70X-N
1 – 2
[2] Operation Manual
ENTER button
For setting items selected
or adjusted on the menu.
KEYSTONE button
For entering the Keystone
Correction mode.
Carrying handle
For carrying the
projector.
STANDBY button
For putting the projector
into standby mode.
ON button
For turning the power on.
Adjustment buttons
(
/
/ /
)
For selecting menu items
and other settings.
ZOOM button
For adjusting the projected
image size.
FOCUS button
For adjusting the focus.
Power indicator
MENU button
For displaying adjustment
and setting screens.
UNDO button
For undoing an operation
or returning to the previous
display.
AUTO SYNC button
For automatically
adjusting images when
connected to a computer.
INPUT 1, 2, 3 button
For switching input mode
1, 2 or 3.
INPUT 4, 5 button
For switching input mode
4 or 5.
Volume buttons
For adjusting the speaker
sound level.
Temperature warning
indicator
Lamp indicator 2
Lamp indicator 1
Remote control
sensor
Speaker
Adjustment foot
(on the bottom of
the projector)
Intake vent
Adjustment foot
(on the bottom of
the projector)
Lamp unit cover
Intake vent
Speaker
H & V LENS SHIFT button
For shifting the lens horizontally
and vertically.
Projector
Part Names and Functions
Attaching the lens cap
Push the lens cap on until it clicks
into position.
Removing the lens cap
Pull the lens cap directly outward.
Top View
Front View
XG-PH70X/XG-PH70X-N
1 – 3
About the Indicators on the Projector
Power indicator
Red on ... Normal (Standby)
Green on ... Normal (Power on)
Red blinks ... The intake vent cover is open.
Temperature warning indicator
Off ... Normal
Red blinks/on ...The internal temperature is abnormally
high.
Lamp indicators 1, 2
Green on ... Normal
Green blinks ... The lamp is warming up.
Red on ... The lamp has been shut down abnormally or
needs to be changed.
Part Names and Functions
XG-PH70X/XG-PH70X-N
1 – 4
Projector (Side View)
Using the Kensington Lock
This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the system for instructions on how to use it to secure the
projector.
INPUT 1 terminal
Terminal for computer RGB
and component signals.
AUDIO input (1) terminal
Audio input terminal for
INPUT 1.
INPUT 2 terminals
BNC terminals for computer
RGB and component
signals.
INPUT 4 terminal
Terminal for connecting
video equipment.
INPUT 5 terminal
Terminal for connecting
video equipment with an
S-video terminal.
AUDIO input (4, 5) terminals
Shared audio input terminals for
INPUT 4 and 5.
RS-232C terminal
Terminal for controlling the
projector using a computer.
WIRED REMOTE terminal
For connecting the remote
control to the projector when
the signals from the remote
control cannot reach the
remote control sensor.
INPUT 3 terminal
Terminal for DVI digital RGB
and digital component signals.
OUTPUT (FOR INPUT 1, 2)
terminal
Output terminal for computer
RGB and component signals.
Shared for INPUT 1 and 2.
AUDIO input (2, 3) terminal
Shared audio input terminal for
INPUT 2 and 3.
AUDIO OUTPUT terminal
Audio output terminal shared
for INPUT 1
−5.
Remote control sensor
Exhaust vent
The speed and pitch of
the cooling fan may
change during operation
in response to internal
temperature changes.
This is normal operation
and does not indicate a
malfunction.
AC socket
Connect the supplied Power
cord.
Kensington Security
Standard connector
LAN terminal
Terminal for controlling the
projector using a computer
via network.
Terminals
Refer to "INPUT/OUTPUT Terminals and Connectable Main Equipment" on
Page of 15
Display

Download Sharp XG-PH70X (serv.man10) User Guide / Operation Manual

Here you can read online and download Sharp XG-PH70X (serv.man10) User Guide / Operation Manual in PDF. XG-PH70X (serv.man10) user guide / operation manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp XG-PH70X (serv.man10) Projector. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.