XG-P25XE (serv.man37). Appendix - Sharp Projector User Guide / Operation Manual. Page 8

Product type

Model

Video system

Display method

LCD panel

Standard Lens

Projection lamp

Video input signal

S-video input signal

Component input signal

Horizontal resolution

RGB input signal

Pixel clock

Vertical frequency

Horizontal frequency

Computer control signal

Speaker system

Rated voltage

Input current

Rated frequency

Power consumption

Heat dissipation

Operating temperature

Storage temperature

Cabinet

I/R carrier frequency

Dimensions (approx.)

Weight (approx.)

Supplied accessories

Replacement parts

LCD Projector
XG-P25X
PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
DTV 480I/480P/580I/580P/720P/1035I/1080I
LCD panel 

 3, RGB optical shutter method

Panel size: 1.3

 (33mm) (20.0 [H]  26.6 [W] mm)

Display method: Translucent TN liquid crystal panel
Drive method: TFT (Thin Film Transistor) Active Matrix panel
No. of dots: 786,432 dots (1,024 [H] 

 768 [V])

1–1.3 

 zoom lens, F1.7–2.4, f = 49.2–63.8 mm

AC 270 W lamp
RCA Connector (INPUT 4): VIDEO, composite video, 1.0 Vp-p, sync negative, 75 

Ω

terminated
RCA Connector: AUDIO, 0.5 Vrms more than 22 k

Ω (stereo)

4-pin Mini DIN connector (INPUT 5)
Y (luminance signal): 1.0 Vp-p, sync negative, 75 

Ω terminated

C (chrominance signal): Burst 0.286 Vp-p, 75 

Ω terminated

BNC Connector (INPUT 2)
Y: 1.0 Vp-p, sync negative, 75 

Ω  terminated

P

B

: 0.7 Vp-p, 75 

Ω  terminated

P

R

: 0.7 Vp-p, 75 

Ω  terminated

520 TV lines (S-video input), 750 TV lines (DTV 720P input, STRETCH mode)
15-

PIN

 

MINI

 D-

SUB

 

CONNECTOR

 (INPUT 1), 5 BNC 

CONNECTOR

 (INPUT 2):

RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,
75 

Ω terminated

DVI 

CONNECTOR

 (29-

PIN

) (INPUT 3), RGB (DIGITAL), 250–1,000 mV, 50 

Ω

H

ORIZONTAL

 

SYNC

. 

SIGNAL

: TTL level (positive/negative) or composite sync (Apple only)

V

ERTICAL

 

SYNC

. 

SIGNAL

: Same as above

S

TEREO

 M

INIJACK

: AUDIO, 0.5 Vrms, more than 22 k

Ω (stereo)

12–230 MHz
43–200 Hz
15–126 kHz *
9-pin D-sub connector (RS-232C Input Port/Output Port)
1 

49

⁄

64

 (4.5 cm) round  2

2 W 

 2 W (stereo)

AC 100–240 V
3.9 A
50/60 Hz
380 W
1,430 BTU/hour
41°F to 104°F (

5°C to 40°C)

4°F to 140°F (20°C to 60°C)
Plastic
38 kHz
12 

9

⁄

16

 (W)  6 

3

⁄

32

 (H)  16 

21

⁄

32

 (D) (319.0  155.0  423.0 mm) (main body only)

12 

11

⁄

32

 (W)  7 

27

⁄

64

 (H)  17 

17

⁄

32

 (D) (322.5  188.5  445.0 mm) (including standard

lens, adjustment feet and projecting parts)
21.4 lbs. (9.7 kg)
Remote control, Two R-6 batteries, Power cord, RGB cable (9

 10, 3 m), Computer audio

cable (9

 10, 3 m), Three BNC-RCA adaptors, Extra air filter, Lens cap, CD-ROM, LCD

projector operation manual, Quick reference guides, ID number seal
Lamp unit (Lamp/cage module) (BQC-XGP25X//1), Remote control (RRMCGA048WJSA),
Two R-6 batteries (“AA” size, UM/SUM-3, HP-7 or similar), Power cord for U.S., Canada
etc. (QACCDA010WJPZ), Power cord for Europe, except U.K. (QACCV4002CEZZ), Power
cord for U.K., Hong Kong and Singapore (QACCBA012WJPZ), Power cord for Australia,
New Zealand and Oceania (QACCL3022CEZZ), RGB cable (QCNWGA012WJPZ),
Computer audio cable (QCNWGA013WJPZ), BNC-RCA adaptors (QPLGJ0107GEZZ), Air
filter (PFILD0080CEZZ), Lens cap (PCAPH1056CESA), CD-ROM (UDSKAA004WJZZ,
UDSKAA005WJZZ), LCD projector operation manual (TINS-A133WJZZ), Quick reference
guides, Sharp Advanced Presentation Software installation guide (TINS-A139WJZZ), ID
number seal (TLABZ0781CEZZ)

* When the RGB input is used for displaying moving images received as interlaced image signal, the images may not be displayed as you

intended depending on the type of the signal. Please use the component input, video input, or s-video input in case this happens.

This SHARP projector uses LCD (Liquid Crystal Display) panels. These
very sophisticated panels contain 786,432 pixels (

 RGB) TFTs (Thin

Film Transistors). As with any high technology electronic equipment
such as large screen TVs, video systems and video cameras, there
are certain acceptable tolerances that the equipment must conform
to.

This unit has some inactive TFTs within acceptable tolerances which
may result in illuminated or inactive dots on the picture screen. This
will not affect the picture quality or the life expectancy of the unit.

Specifications are subject to change without notice.