XG-P25XE (serv.man11). Electrical adjustment - Sharp Projector Service Manual (repair manual). Page 6

1. Heat the thermistor using a

dryer.

»

Make sure the “TEMP” is displayed.

1. Receive the PHASE check

pattern signal.

»

Call the VGA/S-VGA/XGA mode and make sure
that the clock, phase, horizontal and vertical
positions can be automatically adjusted.

»

Make sure the keystone correction functions well.

»

In the process mode and select OFF. Make sure that
the off-timer starts with “5” (minutes), counts down
each minute in 1 second, and turns off the set at “0”.

1. Receive the RGB signal.

»

In the process mode and select L4. Check the pic-
ture, brightness, red, blue, clock, phase, horizontal
position, and vertical position.

»

In the process mode nad select L3. Check the bass,
treble and balance.

1. Receive the monoscope

pattern signal.

»

In the process mode and select L2. Check the pic-
ture, brightness and sharpness.

1. Receive the color bar sig-

nal.

»

In the process mode and select L1. Check the color
and tint.

S4

"Factory setting 4" for USA and Canada

S3

"Factory setting 3" for Europe, Austraia

and Hong Kong.

Remote controller setting

Process

adjustment

»

Make the following settings.