Read Sharp XG-NV4SE (serv.man4) Service Manual online
12
XG-NV4SE/SM
XG-NV40SA
XG-NV40SA
2. Removing the top and rear cabinets
2-1. Remove the five rear cabinet lock screws.
2-2. Remove the four terminal board lock screws off the rear cabinet. Unhook and detach the rear cabinet from
2-2. Remove the four terminal board lock screws off the rear cabinet. Unhook and detach the rear cabinet from
below.
2-3. Remove the four top cabinet lock screws from below.
SHARP
2-4
(KY)
Top cabinet
Rear cabinet
Video Unit (for XG-NV4SM,
XG-NV40SA as well as AUSTRALIA,
NEW ZEALAND and HONG KONG
versions of XG-NV4SE)
XG-NV40SA as well as AUSTRALIA,
NEW ZEALAND and HONG KONG
versions of XG-NV4SE)
2-4. Slowly lift the top cabinet and disconnect the operation key unit connector (KY). Then take away the top
cabinet.
SHARP
2-3
2-2
2-1
Press both sides of the bottom
cabinet in the directions of
arrow to undo the hooks. Lift
and detach the top cabinet.
cabinet in the directions of
arrow to undo the hooks. Lift
and detach the top cabinet.
Hook
Click on the first or last page to see other XG-NV4SE (serv.man4) service manuals if exist.