Read Sharp XG-NV1E (serv.man4) Service Manual online
XG-NV1E
XG-NV1EA
XG-NV1EA
15
5. Removing the optics mechanism assembly
5-1. Remove the two screws off the angles A and B of the carrying handle. Detach the carrying handle.
5-2. Remove the two screws off the lamp socket holder. Take out the lamp socket.
5-3. Disconnect the bimetal connector (BA). Remove the four screws off the optics mechanism assembly, and
5-2. Remove the two screws off the lamp socket holder. Take out the lamp socket.
5-3. Disconnect the bimetal connector (BA). Remove the four screws off the optics mechanism assembly, and
pull up and away this assembly.
5-4. Remove the two screws off the exhaust panel. Separate the panel from the bottom cabinet.
5-5. Remove the screw off the power/ballast unit assembly. Pull up and away the unit.
5-5. Remove the screw off the power/ballast unit assembly. Pull up and away the unit.
5-1
5-5
5-1
5-3
5-3
5-2
5-3
(BA)
5-3
5-4
Power/Ballast Unit
Carrying
Handle
Optics
Mechanism
Ass'y
Exhaust
Panel
Click on the first or last page to see other XG-NV1E (serv.man4) service manuals if exist.