XG-MB70X. Version 1.3 - Sharp Projector Handy Guide. Page 8

8

• 

The warning lights on the projector indicate problems inside the projector.

• 

If a problem occurs, either the temperature warning indicator or the lamp replacement
indicator will illuminate red, and the power will turn off. After the power has been turned
off, follow the procedures given below.

 

If the temperature inside the projector increases, due
to blockage of the air vents, or the setting location,
“TEMP ” will blink in the lower left corner of the
picture. If the temperature keeps on rising, the lamp
will turn off and the temperature warning indicator
will blink, the cooling fan will run for further 90
seconds, then the power will be shut off. After
“TEMP” appears, be sure to perform the following
measures.

• 

When the lamp life reaches 5% or less, “LAMP”
will be displayed on the screen in yellow. When
the lamp life reaches 0%, “LAMP” will change to
red, the lamp will automatically turn off and then
the projector as well. At this time, the Lamp
Replacement Indicator will illuminate in red.

• 

If you try to turn on the projector a fourth time
without replacing the lamp, the projector will not
turn on.